Citation: | Wenjin Yu, Yu Zou, Shining Zhang, Zishi Liu, Cuncun Wu, Bo Qu, Zhijian Chen, Lixin Xiao. Carbon-based perovskite solar cells with electron and hole-transporting/-blocking layers[J]. Materials Futures, 2023, 2(2): 022101. doi: 10.1088/2752-5724/acbbc2 |
[1] |
Yoo J J, et al 2021 Efficient perovskite solar cells via improved carrier management Nature 590 587-93 doi: 10.1038/s41586-021-03285-w
|
[2] |
Jeong J, et al 2021 Pseudo-halide anion engineering for a-FAPbI3 perovskite solar cells Nature 592 381-5 doi: 10.1038/s41586-021-03406-5
|
[3] |
Min H, et al 2021 Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes Nature 598 444-50 doi: 10.1038/s41586-021-03964-8
|
[4] |
Kim M, et al 2022 Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells Science 375 302-6 doi: 10.1126/science.abh1885
|
[5] |
Liang L, Cai Y, Li X, Nazeeruddin M K, Gao P 2018 All that glitters is not gold: recent progress of alternative counter electrodes for perovskite solar cells Nano Energy 52 211-38 doi: 10.1016/j.nanoen.2018.07.049
|
[6] |
Sirotinskaya S, Schmechel R, Benson N 2020 Influence of the cathode microstructure on the stability of inverted planar perovskite solar cells RSC Adv. 10 23653-61 doi: 10.1039/D0RA00195C
|
[7] |
Kay A, Gratzel M 1996 Low cost photovoltaic modules based on dye sensitized nanocrystalline titanium dioxide and carbon powder Sol. Energy Mater. Sol. Cells 44 99-117 doi: 10.1016/0927-0248(96)00063-3
|
[8] |
Han H, Bach U, Cheng Y-B, Caruso R A, MacRae C 2009 A design for monolithic all-solid-state dye-sensitized solar cells with a platinized carbon counterelectrode Appl. Phys. Lett. 94 103102 doi: 10.1063/1.3086895
|
[9] |
Mei A Y, et al 2014 A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability Science 345 295-8 doi: 10.1126/science.1254763
|
[10] |
Zhang F G, Yang X C, Cheng M, Wang W H, Sun L C 2016 Boosting the efficiency and the stability of low cost perovskite solar cells by using CuPc nanorods as hole transport material and carbon as counter electrode Nano Energy 20 108-16 doi: 10.1016/j.nanoen.2015.11.034
|
[11] |
Jeon I, Seo S, Sato Y, Delacou C, Anisimov A, Suenaga K, Kauppinen E I, Maruyama S, Matsuo Y 2017 Perovskite solar cells using carbon nanotubes both as cathode and as anode J. Phys. Chem. C 121 25743-9 doi: 10.1021/acs.jpcc.7b10334
|
[12] |
Wang Y, et al 2022 Defective MWCNT enabled dual interface coupling for carbon-based perovskite solar cells with efficiency exceeding 22% Adv. Funct. Mater. 32 2204831 doi: 10.1002/adfm.202204831
|
[13] |
Zhang H, Xiao J, Shi J, Su H, Luo Y, Li D, Wu H, Cheng Y-B, Meng Q 2018 Self-adhesive macroporous carbon electrodes for efficient and stable perovskite solar cells Adv. Funct. Mater. 28 1802985 doi: 10.1002/adfm.201802985
|
[14] |
Zou Y, et al 2021 Improving interfacial charge transfer by multi-functional additive for high-performance carbon-based perovskite solar cells Appl. Phys. Lett. 119 151104 doi: 10.1063/5.0061869
|
[15] |
Zhang C, et al 2021 Ti1-graphene single-atom material for improved energy level alignment in perovskite solar cells Nature Energy 6 1154-63 doi: 10.1038/s41560-021-00944-0
|
[16] |
Lin S Y, et al 2018 Efficient and stable planar hole-transport-material-free perovskite solar cells using low temperature processed SnO2 as electron transport material Org. Electron. 53 235-41 doi: 10.1016/j.orgel.2017.12.002
|
[17] |
Wu Z, Song T, Sun B 2017 Carbon-based materials used for perovskite solar cells Chemnanomat 3 75-88 doi: 10.1002/cnma.201600312
|
[18] |
Xu L, et al 2017 Stable monolithic hole-conductor-free perovskite solar cells using TiO2 nanoparticle binding carbon films Org. Electron. 45 131-8 doi: 10.1016/j.orgel.2017.03.005
|
[19] |
Zhang H, Wang H, Williams S T, Xiong D, Zhang W, Chueh -C-C, Chen W, Jen A K Y 2017 SrCl2 derived perovskite facilitating a high efficiency of 16% in hole-conductor-free fully printable mesoscopic perovskite solar cells Adv. Mater. 29 1606608 doi: 10.1002/adma.201606608
|
[20] |
Liu X Y, Liu Z Y, Sun B, Tan X H, Ye H B, Tu Y X, Shi T L, Tang Z R, Liao G L 2018 17.46% efficient and highly stable carbon-based planar perovskite solar cells employing Ni-doped rutile TiO2 as electron transport layer Nano Energy 50 201-11 doi: 10.1016/j.nanoen.2018.05.031
|
[21] |
Liu X, Liu Z, Sun B, Tan X, Ye H, Tu Y, Shi T, Tang Z, Liao G 2018 All low-temperature processed carbon-based planar heterojunction perovskite solar cells employing Mg-doped rutile TiO2 as electron transport layer Electrochim. Acta 283 1115-24 doi: 10.1016/j.electacta.2018.07.044
|
[22] |
Abulikemu M, Neophytou M, Barbe J M, Tietze M L, El Labban A, Anjum D H, Amassian A, McCulloch I, Del Gobbo S 2017 Microwave-synthesized tin oxide nanocrystals for low-temperature solution-processed planar junction organo-halide perovskite solar cells J. Mater. Chem. A 5 7759-63 doi: 10.1039/C7TA00975E
|
[23] |
Baena J P C, et al 2015 Highly efficient planar perovskite solar cells through band alignment engineering Energy Environ. Sci. 8 2928-34 doi: 10.1039/C5EE02608C
|
[24] |
Ke W J, et al 2015 Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells J. Am. Chem. Soc. 137 6730-3 doi: 10.1021/jacs.5b01994
|
[25] |
Ye H B, Liu Z Y, Liu X Y, Sun B, Tan X H, Tu Y X, Shi T L, Tang Z R, Liao G L 2019 17.78% efficient low-temperature carbon-based planar perovskite solar cells using Zn-doped SnO2 electron transport layer Appl. Surf. Sci. 478 417-25 doi: 10.1016/j.apsusc.2019.01.237
|
[26] |
Khambunkoed N, Homnan S, Gardchareon A, Chattrapiban N, Songsiriritthigul P, Wongratanaphisan D, Ruankham P 2021 Fully-covered slot-die-coated ZnO thin films for reproducible carbon-based perovskite solar cells Mater. Sci. Semicond. Process. 136 106151 doi: 10.1016/j.mssp.2021.106151
|
[27] |
Liu X, Tan X, Liu Z, Ye H, Sun B, Shi T, Tang Z, Liao G 2019 Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering Nano Energy 56 184-95 doi: 10.1016/j.nanoen.2018.11.053
|
[28] |
Liu Z Y, Sun B, Liu X, Han J, Ye H, Tu Y, Chen C, Shi T, Tang Z, Liao G 2018 15% efficient carbon based planar-heterojunction perovskite solar cells using a TiO2/SnO2 bilayer as the electron transport layer J. Mater. Chem. A 6 7409-19 doi: 10.1039/C8TA00526E
|
[29] |
Liu Z Y, Liu X Y, Sun B, Tan X H, Ye H B, Tu Y X, Shi T L, Tang Z R, Liao G L 2019 Fully low-temperature processed carbon-based perovskite solar cells using thermally evaporated cadmium sulfide as efficient electron transport layer Org. Electron. 74 152-60 doi: 10.1016/j.orgel.2019.07.004
|
[30] |
Wu X, Xie L Q, Lin K B, Lu J X, Wang K X, Feng W J, Fan B B, Yin P G, Wei Z H 2019 Efficient and stable carbon-based perovskite solar cells enabled by the inorganic interface of CuSCN and carbon nanotubes J. Mater. Chem. A 7 12236-43 doi: 10.1039/C9TA02014D
|
[31] |
Jin J J, Yang M, Deng W, Xin J, Tai Q, Qian J, Dong B, Li W, Wang J, Li J 2021 Highly efficient and stable carbon-based perovskite solar cells with the polymer hole transport layer Sol. Energy 220 491-7 doi: 10.1016/j.solener.2021.03.081
|
[32] |
Zhao F, Zhou J, Tao J H, Guo Y X, Jiang J C, Chu J H 2022 Enhancing photovoltaic performance of carbon-based planar Cs3Sb2I9-xClx solar cells by using P3HT as hole transport material J. Alloys Compd. 897 162741 doi: 10.1016/j.jallcom.2021.162741
|
[33] |
Liu Z Y, Sun B, Liu X Y, Han J H, Ye H B, Shi T L, Tang Z R, Liao G L 2018 Efficient carbon-based CsPbBr3 inorganic perovskite solar cells by using Cu-phthalocyanine as hole transport material Nano Micro Lett. 10 34 doi: 10.1007/s40820-018-0187-3
|
[34] |
Yang J L, Yan D H 2009 Weak epitaxy growth of organic semiconductor thin films Chem. Soc. Rev. 38 2634-45 doi: 10.1039/b815723p
|
[35] |
Duan J L, Wang Y D, Yang X Y, Tang Q W 2020 Alkyl-chain-regulated charge transfer in fluorescent inorganic CsPbBr3 perovskite solar cells Angew. Chem., Int. Ed. 59 4391-5 doi: 10.1002/anie.202000199
|
[36] |
Duan J L, Zhao Y Y, Wang Y D, Yang X Y, Tang Q W 2019 Hole-boosted Cu(Cr,M)O2 nanocrystals for all-inorganic CsPbBr3 perovskite solar cells Angew. Chem., Int. Ed. 58 16147-51 doi: 10.1002/anie.201910843
|
[37] |
Yang F, Dong L R, Jang D, Saparov B, Tam K C, Zhang K C, Li N, Brabec C J, Egelhaaf H J 2021 Low temperature processed fully printed efficient planar structure carbon electrode perovskite solar cells and modules Adv. Energy Mater. 11 2101219 doi: 10.1002/aenm.202101219
|
[38] |
Chu Q-Q, et al 2019 Highly stable carbon-based perovskite solar cell with a record efficiency of over 18% via hole transport engineering J. Mater. Sci. Technol. 35 987-93 doi: 10.1016/j.jmst.2018.12.025
|
[39] |
Liu Y, He B L, Duan J L, Zhao Y Y, Ding Y, Tang M X, Chen H Y, Tang Q W 2019 Poly(3-hexylthiophene)/zinc phthalocyanine composites for advanced interface engineering of 10.03%-efficiency CsPbBr3 perovskite solar cells J. Mater. Chem. A 7 12635-44 doi: 10.1039/C9TA01151J
|
[40] |
Zong Z H, He B L, Zhu J W, Ding Y, Zhang W Y, Duan J L, Zhao Y Y, Chen H Y, Tang Q W 2020 Boosted hole extraction in all-inorganic CsPbBr3 perovskite solar cells by interface engineering using MoO2/N-doped carbon nanospheres composite Sol. Energy Mater. Sol. Cells 209 110460 doi: 10.1016/j.solmat.2020.110460
|
[41] |
Mashhoun S, Hou Y, Chen H W, Tajabadi F, Taghavinia N, Egelhaaf H J, Brabec C J 2018 Resolving a critical instability in perovskite solar cells by designing a scalable and printable carbon based electrode-interface architecture Adv. Energy Mater. 8 1802085 doi: 10.1002/aenm.201802085
|
[42] |
Zhong H, et al 2022 All-inorganic perovskite solar cells with tetrabutylammonium acetate as the buffer layer between the SnO2 electron transport film and CsPbI3 ACS Appl. Mater. Interfaces 14 5183-93 doi: 10.1021/acsami.1c18375
|
[43] |
Cai W, Lv Y, Chen K, Zhang Z, Jin Y, Zhou X 2020 Carbon-based all-inorganic CsPbI2Br perovskite solar cells using TiO2 nanorod arrays: interface modification and the enhanced photovoltaic performance Energy Fuels 34 11670-8 doi: 10.1021/acs.energyfuels.0c01821
|
[44] |
Ti J, et al 2022 A double-sided tape modifier bridging the TiO2/perovskite buried interface for efficient and stable all-inorganic perovskite solar cells J. Mater. Chem. A 10 6649-61 doi: 10.1039/D2TA00389A
|
[45] |
Zhou Q, Duan J, Yang X, Duan Y, Tang Q 2020 Interfacial strain release from the WS2/CsPbBr3 van der Waals heterostructure for 1.7V voltage all-inorganic perovskite solar cells Angew. Chem., Int. Ed. 59 21997-2001 doi: 10.1002/anie.202010252
|
[46] |
Deng F, Li X, Lv X, Zhou J, Chen Y, Sun X, Zheng Y-Z, Tao X, Chen J-F 2020 Low-temperature processing all-inorganic carbon-based perovskite solar cells up to 11.78% efficiency via alkali hydroxides interfacial engineering ACS Appl. Energy Mater. 3 401-10 doi: 10.1021/acsaem.9b01652
|
[47] |
Zhu J, Tang M, He B, Zhang W, Li X, Gong Z, Chen H, Duan Y, Tang Q 2020 Improved charge extraction through interface engineering for 10.12% efficiency and stable CsPbBr3 perovskite solar cells J. Mater. Chem. A 8 20987-97 doi: 10.1039/D0TA08675D
|
[48] |
Yang Y, et al 2019 An ultrathin ferroelectric perovskite oxide layer for high-performance hole transport material free carbon based halide perovskite solar cells Adv. Funct. Mater. 29 1806506 doi: 10.1002/adfm.201806506
|
[49] |
Shi L, et al 2021 MAAc ionic liquid-assisted defect passivation for efficient and stable CsPbIBr2 perovskite solar cells ACS Appl. Energy Mater. 4 10584-92 doi: 10.1021/acsaem.1c01537
|
[50] |
Zhang Z, et al 2022 Accelerated sequential deposition reaction via crystal orientation engineering for low-temperature, high-efficiency carbon-electrode CsPbBr3 solar cells Energy Environ. Mater. e12524 doi: 10.1002/eem2.12524
|
[51] |
Liu L, Mei A, Liu T, Jiang P, Sheng Y, Zhang L, Han H 2015 Fully printable mesoscopic perovskite solar cells with organic silane self-assembled monolayer J. Am. Chem. Soc. 137 1790-3 doi: 10.1021/ja5125594
|
[52] |
Chai W, Ma J, Zhu W, Chen D, Xi H, Zhang J, Zhang C, Hao Y 2021 Suppressing halide phase segregation in CsPbIBr2 films by polymer modification for hysteresis-less all-inorganic perovskite solar cells ACS Appl. Mater. Interfaces 13 2868-78 doi: 10.1021/acsami.0c20135
|
[53] |
Yuan H, Zhao Y, Duan J, He B, Jiao Z, Tang Q 2018 Enhanced charge extraction by setting intermediate energy levels in all-inorganic CsPbBr3 perovskite solar cells Electrochim. Acta 279 84-90 doi: 10.1016/j.electacta.2018.05.087
|
[54] |
Yang Y, Chen H, Hu C, Yang S 2019 Polyethyleneimine-functionalized carbon nanotubes as an interlayer to bridge perovskite/carbon for all inorganic carbon-based perovskite solar cells J. Mater. Chem. A 7 22005-11 doi: 10.1039/C9TA08177A
|
[55] |
Li J, Yan F, Yang P, Duan Y, Duan J, Tang Q 2022 Suppressing interfacial shunt loss via functional polymer for performance improvement of lead-free Cs2AgBiBr6 double perovskite solar cells Solar RRL 6 2100791 doi: 10.1002/solr.202100791
|
[56] |
Ding Y, He B, Zhu J, Zhang W, Su G, Duan J, Zhao Y, Chen H, Tang Q 2019 Advanced modification of perovskite surfaces for defect passivation and efficient charge extraction in air-stable CsPbBr3 perovskite solar cells ACS Sustain. Chem. Eng. 7 19286-94 doi: 10.1021/acssuschemeng.9b05631
|
[57] |
Wu Z, Liu Z, Hu Z, Hawash Z, Qiu L, Jiang Y, Ono L K, Qi Y 2019 Highly efficient and stable perovskite solar cells via modification of energy levels at the perovskite/carbon electrode interface Adv. Mater. 31 1804284 doi: 10.1002/adma.201804284
|
[58] |
Fu X, Zhou K, Zhou X, Ji H, Min Y, Qian Y 2022 Surface passivation for enhancing photovoltaic performance of carbon-based CsPbI3 perovskite solar cells J. Solid State Chem. 308 122891 doi: 10.1016/j.jssc.2022.122891
|
[59] |
Zhu W, Chai W, Chen D, Ma J, Chen D, Xi H, Zhang J, Zhang C, Hao Y 2021 High-efficiency (>14%) and air-stable carbon-based, all-inorganic CsPbI2Br perovskite solar cells through a top-seeded growth strategy ACS Energy Lett. 6 1500-10 doi: 10.1021/acsenergylett.1c00325
|
[60] |
Liu J, Zhou Q, Thein N K, Tian L, Jia D, Johansson E M J, Zhang X 2019 In situ growth of perovskite stacking layers for high-efficiency carbon-based hole conductor free perovskite solar cells J. Mater. Chem. A 7 13777-86 doi: 10.1039/C9TA02772F
|
[61] |
Wu Y, Zhang Q, Fan L, Liu C, Wu M, Wang D, Zhang T 2021 Surface reconstruction-induced efficient CsPbI2Br perovskite solar cell using phenylethylammonium iodide ACS Appl. Energy Mater. 4 5583-9 doi: 10.1021/acsaem.1c00295
|
[62] |
Lee K, Kim J, Yu H, Lee J W, Yoon C-M, Kim S K, Jang J 2018 A highly stable and efficient carbon electrode-based perovskite solar cell achieved via interfacial growth of 2D PEA2PbI4 perovskite J. Mater. Chem. A 6 24560-8 doi: 10.1039/C8TA09433K
|
[63] |
Zouhair S, et al 2022 Employing 2D-perovskite as an electron blocking layer in highly efficient (18.5%) perovskite solar cells with printable low temperature carbon electrode Adv. Energy Mater. 12 2200837 doi: 10.1002/aenm.202200837
|
[64] |
Wang K, Yin R, Sun W, Huo X, Liu J, Gao Y, You T, Yin P 2022 In situ constructing intermediate energy-level perovskite transition layer for 15.03% efficiency HTL-free carbon-based perovskite solar cells with a high fill factor of 0.81 Solar RRL 6 2100647 doi: 10.1002/solr.202100647
|
[65] |
Yu Z, Chen B, Liu P, Wang C, Bu C, Cheng N, Bai S, Yan Y, Zhao X 2016 Stable organic-inorganic perovskite solar cells without hole-conductor layer achieved via cell structure design and contact engineering Adv. Funct. Mater. 26 4866-73 doi: 10.1002/adfm.201504564
|
[66] |
Mali S S, Kim H, Kim H H, Park G R, Shim S E, Hong C K 2017 Large area, waterproof, air stable and cost effective efficient perovskite solar cells through modified carbon hole extraction layer Mater. Today Chem. 4 53-63 doi: 10.1016/j.mtchem.2016.12.003
|
[67] |
Wang H, Liu H, Dong Z, Song T, Li W, Zhu L, Bai Y, Chen H 2021 Size mismatch induces cation segregation in CsPbI3: forming energy level gradient and 3D/2D heterojunction promotes the efficiency of carbon-based perovskite solar cells to over 15% Nano Energy 89 106411 doi: 10.1016/j.nanoen.2021.106411
|
[68] |
Han Q, Yang S, Wang L, Yu F, Cai X, Ma T 2022 A double perovskite participation for promoting stability and performance of carbon-based CsPbI2Br perovskite solar cells J. Colloid Interface Sci. 606 800-7 doi: 10.1016/j.jcis.2021.07.122
|
[69] |
Ryu J, Lee K, Yun J, Yu H, Lee J, Jang J 2017 Paintable carbon-based perovskite solar cells with engineered perovskite/carbon interface using carbon nanotubes dripping method Small 13 1701225 doi: 10.1002/smll.201701225
|
[70] |
Wang Y, Zhao H, Mei Y, Liu H, Wang S, Li X 2019 Carbon nanotube bridging method for hole transport layer-free paintable carbon-based perovskite solar cells ACS Appl. Mater. Interfaces 11 916-23 doi: 10.1021/acsami.8b18530
|
[71] |
Wei H, Xiao J, Yang Y, Lv S, Shi J, Xu X, Dong J, Luo Y, Li D, Meng Q 2015 Free-standing flexible carbon electrode for highly efficient hole-conductor-free perovskite solar cells Carbon 93 861-8 doi: 10.1016/j.carbon.2015.05.042
|
[72] |
Guo Y, Zhao F, Tao J, Jiang J, Zhang J, Yang J, Hu Z, Chu J 2019 Efficient and hole-transporting-layer-free CsPbI2Br planar heterojunction perovskite solar cells through rubidium passivation ChemSusChem 12 983-9 doi: 10.1002/cssc.201802690
|
[73] |
Bai S, Cheng N, Yu Z, Liu P, Wang C, Zhao X-Z 2016 Cubic: column composite structure (NH2CH=NH2x(CH3NH31-xPbI3 for efficient hole-transport material-free and insulation layer free perovskite solar cells with high stability Electrochim. Acta 190 775-9 doi: 10.1016/j.electacta.2015.12.170
|
[74] |
Liang J, Liu Z, Qiu L, Hawash Z, Meng L, Wu Z, Jiang Y, Ono L K, Qi Y 2018 Enhancing optical, electronic, crystalline, and morphological properties of cesium lead halide by Mn substitution for high-stability all-inorganic perovskite solar cells with carbon electrodes Adv. Energy Mater. 8 1800504 doi: 10.1002/aenm.201800504
|
[75] |
Chen H, Wei Z, He H, Zheng X, Wong K S, Yang S 2016 Solvent engineering boosts the efficiency of paintable carbon-based perovskite solar cells to beyond 14% Adv. Energy Mater. 6 1502087 doi: 10.1002/aenm.201502087
|
[76] |
Chen H, Zheng X, Li Q, Yang Y, Xiao S, Hu C, Bai Y, Zhang T, Wong K S, Yang S 2016 An amorphous precursor route to the conformable oriented crystallization of CH3NH3PbBr3 in mesoporous scaffolds: toward efficient and thermally stable carbon-based perovskite solar cells J. Mater. Chem. A 4 12897-912 doi: 10.1039/C6TA06115J
|
[77] |
Zhang C, Luo Y, Chen X, Chen Y, Sun Z, Huang S 2016 Effective improvement of the photovoltaic performance of carbon-based perovskite solar cells by additional solvents Nano Micro Lett. 8 347-57 doi: 10.1007/s40820-016-0094-4
|
[78] |
Chang X, et al 2016 Colloidal precursor-induced growth of ultra-even CH3NH3PbI3 for high-performance paintable carbon-based perovskite solar cells ACS Appl. Mater. Interfaces 8 30184-92 doi: 10.1021/acsami.6b09925
|
[79] |
Liu C, He J, Wu M, Wu Y, Du P, Fan L, Zhang Q, Wang D, Zhang T 2020 All-inorganic CsPbI2Br perovskite solar cell with open-circuit voltage over 1.3 V by balancing electron and hole transport Solar RRL 4 2000016 doi: 10.1002/solr.202000016
|
[80] |
Zhang C, Luo Q, Deng X, Zheng J, Ou-Yang W, Chen X, Huang S 2017 Enhanced efficiency and stability of carbon based perovskite solar cells using terephthalic acid additive Electrochim. Acta 258 1262-72 doi: 10.1016/j.electacta.2017.11.183
|
[81] |
Li L, Zhang R, Wu Z, Wang Y, Hong J, Rao H, Pan Z, Zhong X 2022 Crystallization control of air-processed wide-bandgap perovskite for carbon-based perovskite solar cells with 17.69% efficiency Chem. Eng. J. n/a 140566 doi: 10.1016/j.cej.2022.140566
|
[82] |
Ullah S, Yang P, Wang J, Liu L, Yang S-E, Xia T, Chen Y 2022 Low-temperature processing of polyvinylpyrrolidone modified CsPbI2Br perovskite films for high-performance solar cells J. Solid State Chem. 305 122656 doi: 10.1016/j.jssc.2021.122656
|
[83] |
Liu J, Zhu L, Xiang S, Wei Y, Xie M, Liu H, Li W, Chen H 2019 Growing high-quality CsPbBr3 by using porous CsPb2Br5 as an intermediate: a promising light absorber in carbon-based perovskite solar cells Sustain. Energy Fuels 3 184-94 doi: 10.1039/C8SE00442K
|
[84] |
Li X, Zhang Y, Liu G, Zhang Z, Xiao L, Chen Z, Qu B 2021 Ionic liquid as an additive for two-step sequential deposition for air-processed efficient and stable carbon-based CsPbI2Br all-inorganic perovskite solar cells ACS Appl. Energy Mater. 4 13444-9 doi: 10.1021/acsaem.1c01759
|
[85] |
Yan J, Lin S, Qiu X, Chen H, Li K, Yuan Y, Long M, Yang B, Gao Y, Zhou C 2019 Accelerated hole-extraction in carbon-electrode based planar perovskite solar cells by moisture-assisted post-annealing Appl. Phys. Lett. 114 103503 doi: 10.1063/1.5087098
|
[86] |
Zhang Q, et al 2023 Suppressing Coffee ring effect to deposit high-quality CsPbI3 perovskite films by drop casting Chem. Eng. J. 454 140147 doi: 10.1016/j.cej.2022.140147
|
[87] |
Zhang G, Zhang J, Yang Z, Pan Z, Rao H, Zhong X 2022 Role of moisture and oxygen in defect management and orderly oxidation boosting carbon-based CsPbI2Br solar cells to a new record efficiency Adv. Mater. 34 2206222 doi: 10.1002/adma.202206222
|
[88] |
Liu L, Zuo C, Ding L 2021 Self-spreading produces highly efficient perovskite solar cells Nano Energy 90 106509 doi: 10.1016/j.nanoen.2021.106509
|
[89] |
Guo Y, Zhou J, Zhao F, Wu Y, Tao J, Zuo S, Jiang J, Hu Z, Chu J 2021 Carbon-based 2D-layered Rb0.15Cs2.85Sb2ClxI9-x solar cells with superior open-voltage up to 0.88 V Nano Energy 88 106281 doi: 10.1016/j.nanoen.2021.106281
|
[90] |
Tan X, Liu X, Liu Z, Sun B, Li J, Xi S, Shi T, Tang Z, Liao G 2020 Enhancing the optical, morphological and electronic properties of the solution-processed CsPbIBr2 films by Li doping for efficient carbon-based perovskite solar cells Appl. Surf. Sci. 499 143990 doi: 10.1016/j.apsusc.2019.143990
|
[91] |
Liu X, Li J, Liu Z, Tan X, Sun B, Xi S, Shi T, Tang Z, Liao G 2020 Vapor-assisted deposition of CsPbIBr2 films for highly efficient and stable carbon-based planar perovskite solar cells with superior Voc Electrochim. Acta 330 135266 doi: 10.1016/j.electacta.2019.135266
|
[92] |
Kroto H W, Heath J R, Obrien S C, Curl R F, Smalley R E 1985 C60: buckminsterfullerene Nature 318 162-3 doi: 10.1038/318162a0
|
[93] |
Zhang H Y, Li Y, Tan S, Chen Z, Song K, Huang S, Shi J, Luo Y, Li D, Meng Q 2022 High-efficiency (>20%) planar carbon-based perovskite solar cells through device configuration engineering J. Colloid Interface Sci. 608 3151-8 doi: 10.1016/j.jcis.2021.11.050
|
[94] |
Behrouznejad F, et al 2020 Effective carbon composite electrode for low-cost perovskite solar cell with inorganic CuIn0.75Ga0.25S2 hole transport material Solar RRL 4 1900564 doi: 10.1002/solr.201900564
|
[95] |
Zhou Y, et al 2018 Efficiently improving the stability of inverted perovskite solar cells by employing polyethylenimine-modified carbon nanotubes as electrodes ACS Appl. Mater. Interfaces 10 31384-93 doi: 10.1021/acsami.8b10253
|
[96] |
Seo J, Park S, Kim Y C, Jeon N J, Noh J H, Yoon S C, Seok S I 2014 Benefits of very thin PCBM and LiF layers for solution-processed p-i-n perovskite solar cells Energy Environ. Sci. 7 2642-6 doi: 10.1039/C4EE01216J
|
[97] |
Babu V, Pineda R F, Ahmad T, Alvarez A O, Castriotta L A, Di Carlo A, Fabregat-Santiago F, Wojciechowski K 2020 Improved stability of inverted and flexible perovskite solar cells with carbon electrode ACS Appl. Energy Mater. 3 5126-34 doi: 10.1021/acsaem.0c00702
|