Citation: | Wenguang Liu, Hasan Raza, Xiaodong Hu, Sanwan Liu, Zonghao Liu, Wei Chen. Key bottlenecks and distinct contradictions in fast commercialization of perovskite solar cells[J]. Materials Futures, 2023, 2(1): 012103. doi: 10.1088/2752-5724/acba35 |
Conflict of interest
The authors declare no conflict of interest.
[1] |
Shi L, et al 2020 Gas chromatography-mass spectrometry analyses of encapsulated stable perovskite solar cells Science 368 1328 doi: 10.1126/science.aba2412
|
[2] |
Green M, Dunlop E, Hohl-Ebinger J, Yoshita M, Kopidakis N, Hao X 2021 Solar cell efficiency tables (version 57) Prog. Photovolt., Res. Appl. 29 3-15 doi: 10.1002/pip.3371
|
[3] |
National renewable energy laboratory Best research cell efficiency chart (available at:www.nrel.gov/pv/cell-efficiency.html)
|
[4] |
Green M A, Dunlop E D, Siefer G, Yoshita M, Kopidakis N, Bothe K, Hao X 2023 Solar cell efficiency tables (version 61) Prog. Photovolt., Res. Appl. 31 3-16 doi: 10.1002/pip.3646
|
[5] |
Ren G, Han W, Deng Y, Wu W, Li Z, Guo J, Bao H, Liu C, Guo W 2021 Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: a review J. Mater. Chem. A 9 4589-625 doi: 10.1039/D0TA11564A
|
[6] |
Cai Y, Liang L, Gao P 2018 Promise of commercialization: carbon materials for low-cost perovskite solar cells Chin. Phys. B 27 018805 doi: 10.1088/1674-1056/27/1/018805
|
[7] |
Wang G, Liu D, Xiang J, Zhou D, Alameh K, Ding B, Song Q 2016 Efficient perovskite solar cell fabricated in ambient air using one-step spin-coating RSC Adv. 6 43299-303 doi: 10.1039/C6RA05893K
|
[8] |
Wang Q, Zheng X, Deng Y, Zhao J, Chen Z, Huang J 2017 Stabilizing the -phase of CsPbI3 perovskite by sulfobetaine zwitterions in one-step spin-coating films Joule 1 371-82 doi: 10.1016/j.joule.2017.07.017
|
[9] |
Xiao M, Huang F, Huang W, Dkhissi Y, Zhu Y, Etheridge J, Gray-Weale A, Bach U, Cheng Y-B, Spiccia L 2014 A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells Angew. Chem. Int. Ed. 53 9898-903 doi: 10.1002/anie.201405334
|
[10] |
Xiao Z, Bi C, Shao Y, Dong Q, Wang Q, Yuan Y, Wang C, Gao Y, Huang J 2014 Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers Energy Environ. Sci. 7 2619-23 doi: 10.1039/C4EE01138D
|
[11] |
Lee D-K, Jeong D-N, Ahn T K, Park N-G 2019 Precursor engineering for a large-area perovskite solar cell with >19% efficiency ACS Energy Lett. 4 2393-401 doi: 10.1021/acsenergylett.9b01735
|
[12] |
Park N-G, Zhu K 2020 Scalable fabrication and coating methods for perovskite solar cells and solar modules Nat. Rev. Mater. 5 333-50 doi: 10.1038/s41578-019-0176-2
|
[13] |
Yang Z, Zhang S, Li L, Chen W 2017 Research progress on large-area perovskite thin films and solar modules J. Materiomics 3 231-44 doi: 10.1016/j.jmat.2017.09.002
|
[14] |
Wang B, Wong K Y, Xiao X, Chen T 2015 Elucidating the reaction pathways in the synthesis of organolead trihalide perovskite for high-performance solar cells Sci. Rep. 5 10557 doi: 10.1038/srep10557
|
[15] |
Green M A, Dunlop E D, Hohl-Ebinger J, Yoshita M, Kopidakis N, Hao X 2021 Solar cell efficiency tables (version 58) Prog. Photovolt., Res. Appl. 29 657-67 doi: 10.1002/pip.3444
|
[16] |
Green M A, Dunlop E D, Hohl-Ebinger J, Yoshita M, Kopidakis N, Hao X 2022 Solar cell efficiency tables (version 59) Prog. Photovolt., Res. Appl. 30 3-12 doi: 10.1002/pip.3506
|
[17] |
Green M A, Dunlop E D, Hohl-Ebinger J, Yoshita M, Kopidakis N, Bothe K, Hinken D, Rauer M, Hao X 2022 Solar cell efficiency tables (version 60) Prog. Photovolt., Res. Appl. 30 687-701 doi: 10.1002/pip.3595
|
[18] |
Yang Z, Liu Z, Ahmadi V, Chen W, Qi Y 2022 Recent progress on metal halide perovskite solar minimodules Sol. RRL 6 2100458 doi: 10.1002/solr.202100458
|
[19] |
Li M, Wang Z-K, Yang Y-G, Hu Y, Feng S-L, Wang J-M, Gao X-Y, Liao L-S 2016 Copper salts doped spiro-OMeTAD for high-performance perovskite solar cells Adv. Energy Mater. 6 1601156 doi: 10.1002/aenm.201601156
|
[20] |
Shen Y, Deng K, Li L 2022 Spiro-OMeTAD-based hole transport layer engineering toward stable perovskite solar cells Small Methods 6 2200757 doi: 10.1002/smtd.202200757
|
[21] |
Song W, Rakocevic L, Thiruvallur Eachambadi R, Qiu W, Bastos J P, Gehlhaar R, Kuang Y, Hadipour A, Aernouts T, Poortmans J 2021 Improving the morphology stability of spiro-OMeTAD films for enhanced thermal stability of perovskite solar cells ACS Appl. Mater. Interfaces 13 44294-301 doi: 10.1021/acsami.1c11227
|
[22] |
Tumen-Ulzii G, Matsushima T, Adachi C 2021 Mini-review on efficiency and stability of perovskite solar cells with spiro-OMeTAD hole transport layer: recent progress and perspectives Energy Fuels 35 18915-27 doi: 10.1021/acs.energyfuels.1c02190
|
[23] |
Yoo J J, et al 2021 Efficient perovskite solar cells via improved carrier management Nature 590 587-93 doi: 10.1038/s41586-021-03285-w
|
[24] |
Bu T L, et al 2021 Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules Science 372 1327-32 doi: 10.1126/science.abh1035
|
[25] |
Juarez-Perez E J, Haro M 2020 Perovskite solar cells take a step forward Science 368 1309 doi: 10.1126/science.abc5401
|
[26] |
Fu F, et al 2019 I-2 vapor-induced degradation of formamidinium lead iodide based perovskite solar cells under heat-light soaking conditions Energy Environ. Sci. 12 3074-88 doi: 10.1039/C9EE02043H
|
[27] |
Zhao X, Liu T, Burlingame Q C, Liu T, Holley R, Cheng G, Yao N, Gao F, Loo Y-L 2022 Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells Science 377 307-10 doi: 10.1126/science.abn5679
|
[28] |
Zhang H, et al 2022 Fluorine-containing passivation layer via surface chelation for inorganic perovskite solar cells Angew. Chem. Int. Ed. 135 e202216634 doi: 10.1002/ange.202216634
|
[29] |
Lin Y, Fan X, Yang X, Zheng X, Huang W, Shangguan Z, Wang Y, Kuo H-C, Wu T, Chen Z 2021 Remarkable black-phase robustness of CsPbI3 nanocrystals sealed in solid SiO2/AlOx sub-micron particles Small 17 2103510 doi: 10.1002/smll.202103510
|
[30] |
Wang R, Mujahid M, Duan Y, Wang Z, Xue J, Yang Y 2019 A review of perovskites solar cell stability Adv. Funct. Mater. 29 1808843 doi: 10.1002/adfm.201808843
|
[31] |
Khenkin M V, et al 2020 Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures Nat. Energy 5 35-49 doi: 10.1038/s41560-019-0529-5
|
[32] |
Yang D, Zhang X, Hou Y, Wang K, Ye T, Yoon J, Wu C, Sanghadasa M, Liu S F, Priya S 2021 28.3%-efficiency perovskite/silicon tandem solar cell by optimal transparent electrode for high efficient semitransparent top cell Nano Energy 84 105934 doi: 10.1016/j.nanoen.2021.105934
|
[33] |
Chen B, et al 2016 Efficient semitransparent perovskite solar cells for 23.0%efficiency perovskite/silicon four-terminal tandem cells Adv. Energy Mater. 6 1601128 doi: 10.1002/aenm.201601128
|
[34] |
Lai W-C, Lin K-W, Wang Y-T, Chiang T-Y, Chen P, Guo T-F 2016 Oxidized Ni/Au transparent electrode in efficient CH3NH3PbI3 perovskite/fullerene planar heterojunction hybrid solar cells Adv. Mater. 28 3290-7 doi: 10.1002/adma.201504621
|
[35] |
Green M A 2019 How did solar cells get so cheap? Joule 3 631-3 doi: 10.1016/j.joule.2019.02.010
|
[36] |
ulk P, Brooks K, Momblona C, Adams M, Kinge S, Marchal F, Dyson P J, Nazeeruddin M K 2022 Design and cost analysis of 100 MW perovskite solar panel manufacturing process in different locations ACS Energy Lett. 7 3039-44 doi: 10.1021/acsenergylett.2c01728
|
[37] |
Li Z, Zhao Y, Wang X, Sun Y, Zhao Z, Li Y, Zhou H, Chen Q 2018 Cost analysis of perovskite tandem photovoltaics Joule 2 1559-72 doi: 10.1016/j.joule.2018.05.001
|
[38] |
Song Z, McElvany C L, Phillips A B, Celik I, Krantz P W, Watthage S C, Liyanage G K, Apul D, Heben M J 2017 A technoeconomic analysis of perovskite solar module manufacturing with low-cost materials and techniques Energy Environ. Sci. 10 1297-305 doi: 10.1039/C7EE00757D
|
[39] |
Kajal P, Verma B, Vadaga S G R, Powar S 2022 Costing analysis of scalable carbon-based perovskite modules using bottom up technique Glob. Chall. 6 2100070 doi: 10.1002/gch2.202100070
|
[40] |
Jin X, Yang Y, Zhao T, Wu X, Liu B, Han M, Chen W, Chen T, Hu J-S, Jiang Y 2022 Mitigating potential lead leakage risk of perovskite solar cells by device architecture engineering from exterior to interior ACS Energy Lett. 7 3618-36 doi: 10.1021/acsenergylett.2c01602
|
[41] |
Ke W, Kanatzidis M G 2019 Prospects for low-toxicity lead-free perovskite solar cells Nat. Commun. 10 965 doi: 10.1038/s41467-019-08918-3
|
[42] |
Zhu T, Yang Y, Gong X 2020 Recent advancements and challenges for low-toxicity perovskite materials ACS Appl. Mater. Interfaces 12 26776-811 doi: 10.1021/acsami.0c02575
|
[43] |
Jiang Y, Qiu L, Juarez-Perez E J, Ono L K, Hu Z, Liu Z, Wu Z, Meng L, Wang Q, Qi Y 2019 Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation Nat. Energy 4 585-93 doi: 10.1038/s41560-019-0406-2
|
[44] |
Chen S, Deng Y, Gu H, Xu S, Wang S, Yu Z, Blum V, Huang J 2020 Trapping lead in perovskite solar modules with abundant and low-cost cation-exchange resins Nat. Energy 5 1003-11 doi: 10.1038/s41560-020-00716-2
|
[45] |
Hailegnaw B, Kirmayer S, Edri E, Hodes G, Cahen D 2015 Rain on methylammonium lead iodide based perovskites: possible environmental effects of perovskite solar cells J. Phys. Chem. Lett. 6 1543-7 doi: 10.1021/acs.jpclett.5b00504
|