Citation: | H J Kong, T Yang, T L Zhang, B X Cao, C T Liu. Nanostructured steels for advanced structural applications[J]. Materials Futures, 2022, 1(1): 013501. doi: 10.1088/2752-5724/ac376d |
[1] |
He B B, Hu B, Yen H W, Cheng G J, Wang Z K, Luo H W, Huang M X 2017 High dislocation density-induced large ductility in deformed and partitioned steels Science 357 1029-32 doi: 10.1126/science.aan0177
|
[2] |
Liu L, Yu Q, Wang Z, Ell J, Huang M X, Ritchie R O 2020 Making ultrastrong steel tough by grain-boundary delamination Science 368 1347-52 doi: 10.1126/science.aba9413
|
[3] |
Graville B A 1978 Cold cracking in welds in HSLA steels Welding of HSLA (Microalloyed) Structural SteelsProc. Int. Conf.Ohio
|
[4] |
Garcia-Mateo C, Caballero F G, Bhadeshia H K D H 2003 Development of hard bainite ISIJ Int. 43 1238-43 doi: 10.2355/isijinternational.43.1238
|
[5] |
Li Y, Raabe D, Herbig M, Choi P, Goto S, Kostka A, Yarita H, Borchers C, Kirchheim R 2014 Segregation stabilizes nanocrystalline bulk steel with near theoretical strength Phys. Rev. Lett. 113 106104 doi: 10.1103/PhysRevLett.113.106104
|
[6] |
Jiao Z B, Luan J H, Miller M K, Chung Y W, Liu C T 2017 Co-precipitation of nanoscale particles in steels with ultra-high strength for a new era Mater. Today 20 142-54 doi: 10.1016/j.mattod.2016.07.002
|
[7] |
Kong H J, Jiao Z B, Lu J, Liu C T 2021 Low-carbon advanced nanostructured steels: microstructure, mechanical properties, and applications Sci. China Mater. 64 1580-97 doi: 10.1007/s40843-020-1595-2
|
[8] |
Bhadeshia H K D H 2013 The first bulk nanostructured metal Sci. Technol. Adv. Mater. 14 014202 doi: 10.1088/1468-6996/14/1/014202
|
[9] |
Halfa H 2014 Recent trends in producing ultrafine grained steels J. Miner. Mater. Charact. Eng. 2 428-69 doi: 10.4236/jmmce.2014.25047
|
[10] |
Jiao Z B, Luan J H, Miller M K, Liu C T 2015 Precipitation mechanism and mechanical properties of an ultra-high strength steel hardened by nanoscale NiAl and Cu particles Acta Mater. 97 58-67 doi: 10.1016/j.actamat.2015.06.063
|
[11] |
Niu M C, Zhou G, Wang W, Shahzad M B, Shan Y, Yang K 2019 Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel Acta Mater. 179 296-307 doi: 10.1016/j.actamat.2019.08.042
|
[12] |
Jiang S, et al 2017 Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation Nature 544 460-4 doi: 10.1038/nature22032
|
[13] |
Kong H J, Liu C T 2018 A review on nano-scale precipitation in steels Technologies 6 36 doi: 10.3390/technologies6010036
|
[14] |
Kurnsteiner P, Wilms M B, Weisheit A, Gault B, Jagle E A, Raabe D 2020 High-strength Damascus steel by additive manufacturing Nature 582 515-9 doi: 10.1038/s41586-020-2409-3
|
[15] |
Abrahams R A 2019 Low alloy high performance steel USA PatentUS20160369362A1
|
[16] |
Chen R, Kong H J, Luan J H, Wang A D, Jiang P, Liu C T 2020 Effect of external applied magnetic field on microstructures and mechanical properties of laser welding joint of medium-Mn nanostructured steel Mater. Sci. Eng. A 792 139787 doi: 10.1016/j.msea.2020.139787
|
[17] |
Zhang Z W, Liu C T, Wang X L, Miller M K, Ma D, Chen G, Williams J R, Chin B A 2012 Effects of proton irradiation in nanocluster precipitation in ferritic steel containing fcc alloying additions Acta Mater. 60 3034-46 doi: 10.1016/j.actamat.2012.02.008
|
[18] |
Wall M 2020 SpaceX’s Starship will soon be made of different stuff Space.comavailable at:www.space.com/spacex-starship-new-stainless-steel-alloy.html
|
[19] |
Song G, et al 2015 Ferritic alloys with extreme creep resistance via coherent hierarchical precipitates Sci. Rep. 5 16327 doi: 10.1038/srep16327
|
[20] |
Kong H J, Xu C, Bu C C, Da C, Luan J H, Jiao Z B, Chen G, Liu C T 2019 Hardening mechanisms and impact toughening of a high-strength steel containing low Ni and Cu additions Acta Mater. 172 150-60 doi: 10.1016/j.actamat.2019.04.041
|
[21] |
Kuzmina M, Herbig M, Ponge D, Sandlobes S, Raabe D 2015 Linear complexions: confined chemical and structural states at dislocations Science 349 1080-3 doi: 10.1126/science.aab2633
|
[22] |
Kuzmina M, Ponge D, Raabe D 2015 Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: example of a 9 wt% medium Mn steel Acta Mater. 86 182-92 doi: 10.1016/j.actamat.2014.12.021
|
[23] |
Armstrong R W 2017 Dislocation pile-ups, strength properties and fracturing Rev. Adv. Mater. Sci. 48 1-12
|
[24] |
Omori T, Ando K, Okano M, Xu X, Tanaka Y, Ohnuma I, Kainuma R, Ishida K 2011 Superelastic effect in polycrystalline ferrous alloys Science 33 68-71 doi: 10.1126/science.1202232
|
[25] |
Tanaka Y, Himuro Y, Kainuma R, Sutou Y, Omori T, Ishida K 2010 Ferrous polycrystalline shape-memory alloy showing huge superelasticity Science 327 1488-90 doi: 10.1126/science.1183169
|
[26] |
Oshima R, Sugiyama M 1982 Martensite transformations in Fe-Pd alloys J. Phys. Colloq. 43 383-8 doi: 10.1051/jphyscol:1982456
|
[27] |
Dunne D P, Wayman C M 1973 The effect of austenite ordering on the martensite transformation in Fe-Pt alloys near the composition Fe3Pt: I. Morphology and transformation characteristics Metall. Trans. 4 137-45 doi: 10.1007/BF02649612
|
[28] |
Kajiwara S 1999 Characteristic features of shape memory effect and related transformation behavior in Fe-based alloys Mater. Sci. Eng. A 273-275 67-88 doi: 10.1016/S0921-5093(99)00290-7
|
[29] |
Maki T, Kobayashi K, Minato M, Tamura I 1984 Thermoelastic martensite in an ausaged Fe-Ni-Ti-Co alloy Scr. Metal. 18 1105-9 doi: 10.1016/0036-9748(84)90187-X
|
[30] |
Tseng L W, Ma J, Hornbuckle B C, Karaman I, Thompson G B, Luo Z P, Chumlyakov Y I 2015 The effect of precipitates on the superelastic response of [100] oriented FeMnAlNi single crystals under compression Acta Mater. 97 234-44 doi: 10.1016/j.actamat.2015.06.061
|