Citation: | Longtao Ren, Jun Liu, Abdul Hameed Pato, Yan Wang, Xiwen Lu, Imran Ali Chandio, Mingyue Zhou, Wen Liu, Haijun Xu, Xiaoming Sun. Rational design of nanoarray structures for lithium–sulfur batteries: recent advances and future prospects[J]. Materials Futures, 2023, 2(4): 042103. doi: 10.1088/2752-5724/ace7e4 |
[1] |
Wu F, Maier J and Yu Y 2020 Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries Chem. Soc. Rev. 49 1569–614
|
[2] |
Liu J et al 2019 Pathways for practical high-energy long-cycling lithium metal batteries Nat. Energy 4 180–6
|
[3] |
Huang Z, Zhang R, Zhang S, Li P, Li C and Zhi C 2022 Recent advances and future perspectives for aqueous zinc-ion capacitors Mater. Futures 1 022101
|
[4] |
Zhao Y, Zhang P, Liang J, Xia X, Ren L, Song L, Liu W and Sun X 2022 Unlocking layered double hydroxide as a high-performance cathode material for aqueous zinc-ion batteries Adv. Mater. 34 2204320
|
[5] |
Liu J, Ren L, Wang Y, Lu X, Zhou M and Liu W 2023 A highly-stable bifunctional NiCo2S4 nanoarray@carbon paper electrode for aqueous polysulfide/iodide redox flow battery J. Power Sources 561 232607
|
[6] |
Tong B, Song Z, Wu H, Wang X, Feng W, Zhou Z and Zhang H 2022 Ion transport and structural design of lithium-ion conductive solid polymer electrolytes: a perspective Mater. Futures 1 042103
|
[7] |
Fu S et al 2021 Ultrathin [110]-confined Li4Ti5O12 nanoflakes for high rate lithium storage Adv. Energy Mater. 11 2003270
|
[8] |
Wu Y et al 2021 In-built ultraconformal interphases enable high-safety practical lithium batteries Energy Storage Mater. 43 248–57
|
[9] |
Goodenough J B and Park K-S 2013 The Li-ion rechargeable battery: a perspective J. Am. Chem. Soc. 135 1167–76
|
[10] |
Pang Q, Liang X, Kwok C Y and Nazar L F 2016 Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes Nat. Energy 1 16132
|
[11] |
Manthiram A, Fu Y, Chung S, Zu C and Su Y 2014 Rechargeable lithium–sulfur batteries Chem. Rev. 114 11751–87
|
[12] |
Ren L, Liu J, Zhao Y, Wang Y, Lu X, Zhou M, Zhang G, Liu W, Xu H and Sun X 2023 Regulating electronic structure of Fe–N4 single atomic catalyst via neighboring sulfur doping for high performance lithium–sulfur batteries Adv. Funct. Mater. 33 2210509
|
[13] |
Seh Z W, Sun Y, Zhang Q and Cui Y 2016 Designing high-energy lithium–sulfur batteries Chem. Soc. Rev. 45 5605–34
|
[14] |
Qiao L, Ren L, Zhang R, Chen J, Xu M, Liu J, Xu H, Liu W, Chang Z and Sun X 2021 Hollow carbon spheres embedded with VN quantum dots as an efficient cathode host for lithium–sulfur batteries Energy Fuels 35 10219–26
|
[15] |
Zhang L, Qin X, Zhao S, Wang A, Luo J, Wang Z L, Kang F, Lin Z and Li B 2020 Advanced matrixes for binder-free nanostructured electrodes in lithium-ion batteries Adv. Mater. 32 1908445
|
[16] |
Zhang H, Ono L K, Tong G, Liu Y and Qi Y 2021 Long-life lithium-sulfur batteries with high areal capacity based on coaxial CNTs@TiN-TiO2 sponge Nat. Commun. 12 4738
|
[17] |
Li J, Cai Y, Wu H, Yu Z, Yan X, Zhang Q, Gao T Z, Liu K, Jia X and Bao Z 2021 Polymers in lithium-ion and lithium metal batteries Adv. Energy Mater. 11 2003239
|
[18] |
Ji X, Lee K T and Nazar L F 2009 A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries Nat. Mater. 8 500–6
|
[19] |
Zheng M, Chi Y, Hu Q, Tang H, Jiang X, Zhang L, Zhang S, Pang H and Xu Q 2019 Carbon nanotube-based materials for lithium–sulfur batteries J. Mater. Chem. A 7 17204–41
|
[20] |
Fang R, Chen K, Yin L, Sun Z, Li F and Cheng H M 2019 The regulating role of carbon nanotubes and graphene in lithium-ion and lithium–sulfur batteries Adv. Mater. 31 1800863
|
[21] |
Duan H, Li K, Xie M, Chen J, Zhou H, Wu X, Ning G, Cooper A I and Li D 2021 Scalable synthesis of ultrathin polyimide covalent organic framework nanosheets for high-performance lithium–sulfur batteries J. Am. Chem. Soc. 143 19446–53
|
[22] |
Chen C, Liang Q, Wang G, Liu D and Xiong X 2022 Grain-boundary-rich artificial SEI layer for high-rate lithium metal anodes Adv. Funct. Mater. 32 2107249
|
[23] |
Huang J, Liu J, He J, Wu M, Qi S, Wang H, Li F and Ma J 2021 Optimizing electrode/electrolyte interphases and Li-ion flux/solvation for lithium-metal batteries with qua-functional heptafluorobutyric anhydride Angew. Chem. 133 20885–90
|
[24] |
Li F, He J, Liu J, Wu M, Hou Y, Wang H, Qi S, Liu Q, Hu J and Ma J 2021 Gradient solid electrolyte interphase and lithium-ion solvation regulated by bisfluoroacetamide for stable lithium metal batteries Angew. Chem., Int. Ed. 60 6600–8
|
[25] |
Ren L, Wang Q, Li Y, Hu C, Zhao Y, Qiao L, Zhou H, Liu W, Xu H and Sun X 2021 Catalytic separators with Co–N–C nanoreactors for high-performance lithium–sulfur batteries Inorg. Chem. Front. 8 3066–76
|
[26] |
Hu Y, Chen W, Lei T, Jiao Y, Wang H, Wang X, Rao G, Wang X, Chen B and Xiong J 2020 Graphene quantum dots as the nucleation sites and interfacial regulator to suppress lithium dendrites for high-loading lithium–sulfur battery Nano Energy 68 104373
|
[27] |
Fu S, Chen J, Wang X, He Q, Tong S and Wu M 2020 Free-standing crystalline@ amorphous core–shell nanoarrays for efficient energy storage Small 16 2000040
|
[28] |
Chao D et al 2016 Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance Nat. Commun. 7 12122
|
[29] |
Jiang J, Li Y, Liu J, Huang X, Yuan C and Lou X W 2012 Recent advances in metal oxide-based electrode architecture design for electrochemical energy storage Adv. Mater. 24 5166–80
|
[30] |
Jiang J, Li Y, Liu J and Huang X 2011 Building one-dimensional oxide nanostructure arrays on conductive metal substrates for lithium-ion battery anodes Nanoscale 3 45–58
|
[31] |
Chan C K, Zhang X F and Cui Y 2008 High capacity Li ion battery anodes using Ge nanowires Nano Lett. 8 307–9
|
[32] |
Black R, Oh S H, Lee J-H, Yim T, Adams B and Nazar L F 2012 Screening for superoxide reactivity in Li-O2 batteries: effect on Li2O2/LiOH crystallization J. Am. Chem. Soc. 134 2902–5
|
[33] |
Singh S K, Takeyasu K and Nakamura J 2019 Active sites and mechanism of oxygen reduction reaction electrocatalysis on nitrogen-doped carbon materials Adv. Mater. 31 1804297
|
[34] |
Zhang J, Li P, Wang Z, Qiao J, Rooney D, Sun W and Sun K 2015 Three-dimensional graphene–Co3O4 cathodes for rechargeable Li–O2 batteries J. Mater. Chem. A 3 1504–10
|
[35] |
Urbonaite S, Poux T and Novák P 2015 Progress towards commercially viable Li–S battery cells Adv. Energy Mater. 5 1500118
|
[36] |
Fang R, Zhao S, Sun Z, Wang D, Cheng H and Li F 2017 More reliable lithium–sulfur batteries: status, solutions and prospects Adv. Mater. 29 1606823
|
[37] |
Chen Y, Wang T, Tian H, Su D, Zhang Q and Wang G 2021 Advances in lithium–sulfur batteries: from academic research to commercial viability Adv. Mater. 33 2003666
|
[38] |
Ni J and Li L 2020 Cathode architectures for rechargeable ion batteries: progress and perspectives Adv. Mater. 32 2000288
|
[39] |
Liu F et al 2018 Upgrading traditional liquid electrolyte via in situ gelation for future lithium metal batteries Sci. Adv. 4 eaat5383
|
[40] |
Chen X, He W, Ding L, Wang S and Wang H 2019 Enhancing interfacial contact in all solid state batteries with a cathode-supported solid electrolyte membrane framework Energy Environ. Sci. 12 938–44
|
[41] |
Liu Z, Mo F, Li H, Zhu M, Wang Z, Liang G and Zhi C 2018 Advances in flexible and wearable energy-storage textiles Small Methods 2 1800124
|
[42] |
Lin D, Liu Y and Cui Y 2017 Reviving the lithium metal anode for high-energy batteries Nat. Nanotechnol. 12 194–206
|
[43] |
Zhong Y, Chen Y, Cheng Y, Fan Q, Zhao H, Shao H, Lai Y, Shi Z, Ke X and Guo Z 2019 Li alginate-based artificial SEI layer for stable lithium metal anodes ACS Appl. Mater. Interfaces 11 37726–31
|
[44] |
Li N W, Shi Y, Yin Y X, Zeng X X, Li J Y, Li C J, Wan L J, Wen R and Guo Y G 2018 A flexible solid electrolyte interphase layer for long-life lithium metal anodes Angew. Chem. 130 1521–5
|
[45] |
Zhang Y et al 2017 High-capacity, low-tortuosity, and channel-guided lithium metal anode Proc. Natl Acad. Sci. 114 3584–9
|
[46] |
Zheng Z, Su Q, Zhang Q, Hu X, Yin Y, Wen R, Ye H, Wang Z and Guo Y 2019 Low volume change composite lithium metal anodes Nano Energy 64 103910
|
[47] |
Duan H, Yin Y, Shi Y, Wang P, Zhang X, Yang C, Shi J, Wen R, Guo Y and Wan L 2018 Dendrite-free Li-metal battery enabled by a thin asymmetric solid electrolyte with engineered layers J. Am. Chem. Soc. 140 82–85
|
[48] |
Liu S, Xia X, Zhong Y, Deng S, Yao Z, Zhang L, Cheng X B, Wang X, Zhang Q and Tu J 2018 3D TiC/C core/shell nanowire skeleton for dendrite-free and long-life lithium metal anode Adv. Energy Mater. 8 1702322
|
[49] |
Zheng Z, Ye H and Guo Z 2020 Recent progress in designing stable composite lithium anodes with improved wettability Adv. Sci. 7 2002212
|
[50] |
Li Y-N, Wang C-Y, Gao R-M, Cao F-F and Ye H 2021 Recent smart lithium anode configurations for high-energy lithium metal batteries Energy Storage Mater. 38 262–75
|
[51] |
Lin D, Liu Y, Pei A and Cui C 2017 Nanoscale perspective: materials designs and understandings in lithium metal anodes Nano Res. 10 4003–26
|
[52] |
Gu J, Chen H, Shi Y, Cao Z, Du Z, Li B and Yang S 2022 Eliminating lightning-rod effect of lithium anodes via sine-wave analogous MXene layers Adv. Energy Mater. 12 2201181
|
[53] |
Gao X, Zhang H, Li Q, Yu X, Hong Z, Zhang X, Liang C and Lin Z 2016 Hierarchical NiCo2O4 hollow microcuboids as bifunctional electrocatalysts for overall water-splitting Angew. Chem., Int. Ed. 55 6290–4
|
[54] |
Hou J, Wu Y, Zhang B, Cao S, Li Z and Sun L 2019 Rational design of nanoarray architectures for electrocatalytic water splitting Adv. Funct. Mater. 29 1808367
|
[55] |
Huang Y, Quan L, Liu T, Chen Q, Cai D and Zhan H 2018 Construction of MOF-derived hollow Ni–Zn–Co–S nanosword arrays as binder-free electrodes for asymmetric supercapacitors with high energy density Nanoscale 10 14171–81
|
[56] |
Deng S, Zhong Y, Zeng Y, Wang Y, Wang X, Lu X, Xia X and Tu J 2018 Hollow TiO2@Co9S8 core–branch arrays as bifunctional electrocatalysts for efficient oxygen/hydrogen production Adv. Sci. 5 1700772
|
[57] |
Zhu C, Wang H and Guan C 2020 Recent progress on hollow array architectures and their applications in electrochemical energy storage Nanoscale Horiz. 5 1188–99
|
[58] |
Lee J, Llerena Zambrano B, Woo J, Yoon K and Lee T 2020 Recent advances in 1D stretchable electrodes and devices for textile and wearable electronics: materials, fabrications, and applications Adv. Mater. 32 1902532
|
[59] |
Lu X, Wang H, Liu X, Song Z, Jiang N, Xie F, Zheng Q and Lin D 2020 Functional separators prepared via in-situ growth of hollow CoSO4 hydrate arrays on pristine polypropylene membrane for high performance lithium–sulfur batteries J. Alloys Compd. 838 155618
|
[60] |
Guo B, Bandaru S, Dai C, Chen H, Zhang Y, Xu Q, Bao S, Chen M and Xu M 2018 Self-supported FeCo2S4 nanotube arrays as binder-free cathodes for lithium–sulfur batteries ACS Appl. Mater. Interfaces 10 43707–15
|
[61] |
Dai C, Lim J M, Wang M, Hu L, Chen Y, Chen Z, Chen H, Bao S J, Shen B and Li Y 2018 Honeycomb-like spherical cathode host constructed from hollow metallic and polar Co9S8 tubules for advanced lithium–sulfur batteries Adv. Funct. Mater. 28 1704443
|
[62] |
Tang W, Wang X, Xie D, Xia X, Gu C and Tu J 2018 Hollow metallic 1T MoS2 arrays grown on carbon cloth: a freestanding electrode for sodium ion batteries J. Mater. Chem. A 6 18318–24
|
[63] |
Shao Y, El-Kady M F, Sun J, Li Y, Zhang Q, Zhu M, Wang H, Dunn B and Kaner R B 2018 Design and mechanisms of asymmetric supercapacitors Chem. Rev. 118 9233–80
|
[64] |
Chen X, Yang H, Liu G, Gao F, Dai M, Hu Y, Chen H, Cao W, Hu P and Hu W 2018 Hollow spherical nanoshell arrays of 2D layered semiconductor for high-performance photodetector device Adv. Funct. Mater. 28 1705153
|
[65] |
Hu C et al 2019 An entangled cobalt–nitrogen–carbon nanotube array electrode with synergetic confinement and electrocatalysis of polysulfides for stable Li–S batteries ACS Appl. Energy Mater. 2 2904–12
|
[66] |
Wang S et al 2021 Insight into MoS2–MoN heterostructure to accelerate polysulfide conversion toward high-energy-density lithium–sulfur batteries Adv. Energy Mater. 11 2003314
|
[67] |
Wang S et al 2019 Efficient trapping and catalytic conversion of polysulfides by VS4 nanosites for Li–S batteries ACS Energy Lett. 4 755–62
|
[68] |
Xu X, Yang Q, Wattanatorn N, Zhao C, Chiang N, Jonas S J and Weiss P S 2017 Multiple-patterning nanosphere lithography for fabricating periodic three-dimensional hierarchical nanostructures ACS Nano 11 10384–91
|
[69] |
Xia X, Tu J, Mai Y, Wang X, Gu C and Zhao X 2011 Self-supported hydrothermal synthesized hollow Co3O4 nanowire arrays with high supercapacitor capacitance J. Mater. Chem. 21 9319–25
|
[70] |
Tang Z, Zhang G, Zhang H, Wang L, Shi H, Wei D and Duan H 2018 MOF-derived N-doped carbon bubbles on carbon tube arrays for flexible high-rate supercapacitors Energy Storage Mater. 10 75–84
|
[71] |
Li F, Xu R, Li Y, Liang F, Zhang D, Fu W and Lv X 2019 N-doped carbon coated NiCo2S4 hollow nanotube as bifunctional electrocatalyst for overall water splitting Carbon 145 521–8
|
[72] |
Liu Z, Zhao W, Kumar P, Li X, Al Wahedi Y, Mkhoyan K A, Tsapatsis M and Stein A 2018 Direct synthesis and pseudomorphic transformation of mixed metal oxide nanostructures with non-close-packed hollow sphere arrays Angew. Chem. 130 15933–7
|
[73] |
Zhou G, Wang D, Li F, Hou P, Yin L, Liu C, Lu G Q M, Gentle I R and Cheng H 2012 A flexible nanostructured sulphur–carbon nanotube cathode with high rate performance for Li–S batteries Energy Environ. Sci. 5 8901–6
|
[74] |
Li S, Xia X, Wang X and Tu J 2016 Free-standing sulfur cathodes composited with carbon nanorods arrays for Li–S batteries application Mater. Res. Bull. 83 474–80
|
[75] |
Yin P et al 2016 Single cobalt atoms with precise N-coordination as superior oxygen reduction reaction catalysts Angew. Chem. 128 10958–63
|
[76] |
Wang X et al 2016 Directly converting Fe-doped metal–organic frameworks into highly active and stable Fe-NC catalysts for oxygen reduction in acid Nano Energy 25 110–9
|
[77] |
Yi F Y, Zhang R, Wang H, Chen L F, Han L, Jiang H L and Xu Q 2017 Metal–organic frameworks and their composites: synthesis and electrochemical applications Small Methods 1 1700187
|
[78] |
Yang X et al 2018 Multi-functional nanowall arrays with unrestricted Li+ transport channels and an integrated conductive network for high-areal-capacity Li–S batteries J. Mater. Chem. A 6 22958–65
|
[79] |
Wang Z et al 2019 Self-supported and flexible sulfur cathode enabled via synergistic confinement for high-energy-density lithium–sulfur batteries Adv. Mater. 31 1902228
|
[80] |
He J, Chen Y and Manthiram A 2018 Vertical Co9S8 hollow nanowall arrays grown on a Celgard separator as a multifunctional polysulfide barrier for high-performance Li–S batteries Energy Environ. Sci. 11 2560–8
|
[81] |
Zhang W, Yan X, Tong X, Yang J, Miao L, Sun Y and Peng L 2016 Synthesis of nickel sulfide monolayer hollow spheres arrays as cathode materials for alkaline batteries Mater. Lett. 178 120–3
|
[82] |
Poongodi S, Kumar P S, Mangalaraj D, Ponpandian N, Meena P, Masuda Y and Lee C 2017 Electrodeposition of WO3 nanostructured thin films for electrochromic and H2S gas sensor applications J. Alloys Compd. 719 71–81
|
[83] |
Zhuo S, Shi Y, Liu L, Li R, Shi L, Anjum D H, Han Y and Wang P 2018 Dual-template engineering of triple-layered nanoarray electrode of metal chalcogenides sandwiched with hydrogen-substituted graphdiyne Nat. Commun. 9 3132
|
[84] |
Zhao Y, Mu S, Sun W, Liu Q, Li Y, Yan Z, Huo Z and Liang W 2016 Growth of copper oxide nanocrystals in metallic nanotubes for high performance battery anodes Nanoscale 8 19994–20000
|
[85] |
Niu C et al 2015 General synthesis of complex nanotubes by gradient electrospinning and controlled pyrolysis Nat. Commun. 6 7402
|
[86] |
Elias J, Lévy-Clément C, Bechelany M, Michler J, Wang G-Y, Wang Z and Philippe L 2010 Hollow urchin-like ZnO thin films by electrochemical deposition Adv. Mater. 22 1607–12
|
[87] |
Xia X, Chao D, Qi X, Xiong Q, Zhang Y, Tu J, Zhang H and Fan H J 2013 Controllable growth of conducting polymers shell for constructing high-quality organic/inorganic core/shell nanostructures and their optical-electrochemical properties Nano Lett. 13 4562–8
|
[88] |
Li B, Li S, Liu J, Wang B and Yang S 2015 Vertically aligned sulfur–graphene nanowalls on substrates for ultrafast lithium–sulfur batteries Nano Lett. 15 3073–9
|
[89] |
Yuan S, Huang X L, Ma D L, Wang H G, Meng F Z and Zhang X B 2014 Engraving copper foil to give large-scale binder-free porous CuO arrays for a high-performance sodium-ion battery anode Adv. Mater. 26 2273–9
|
[90] |
Zuo W, Zhu W, Zhao D, Sun Y, Li Y, Liu J and Lou X W D 2016 Bismuth oxide: a versatile high-capacity electrode material for rechargeable aqueous metal-ion batteries Energy Environ. Sci. 9 2881–91
|
[91] |
Liu J, Song K, van Aken P A, Maier J and Yu Y 2014 Self-supported Li4Ti5O12–C nanotube arrays as high-rate and long-life anode materials for flexible Li-ion batteries Nano Lett. 14 2597–603
|
[92] |
Liu S, Hong X, Wang D, Li Y, Xu J, Zheng C and Xie K 2018 Hollow carbon spheres with nanoporous shells and tailored chemical interfaces as sulfur host for long cycle life of lithium sulfur batteries Electrochim. Acta 279 10–18
|
[93] |
Hernández-Rentero C, Córdoba R, Moreno N, Caballero A, Morales J, Olivares-Marín M and Gómez-Serrano V 2018 Low-cost disordered carbons for Li/S batteries: a high-performance carbon with dual porosity derived from cherry pits Nano Res. 11 89–100
|
[94] |
Liang J, Sun Z, Li F and Cheng H 2016 Carbon materials for Li–S batteries: functional evolution and performance improvement Energy Storage Mater. 2 76–106
|
[95] |
Zheng G, Yang Y, Cha J J, Hong S S and Cui Y 2011 Hollow carbon nanofiber-encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries Nano Lett. 11 4462–7
|
[96] |
Reddy A L M, Shaijumon M M, Gowda S R and Ajayan P M 2009 Coaxial MnO2/carbon nanotube array electrodes for high-performance lithium batteries Nano Lett. 9 1002–6
|
[97] |
Park S-K, Lee J, Hwang T, Jang B and Piao Y 2017 Scalable synthesis of honeycomb-like ordered mesoporous carbon nanosheets and their application in lithium–sulfur batteries ACS Appl. Mater. Interfaces 9 2430–8
|
[98] |
Ni J and Li L 2018 Self-supported 3D array electrodes for sodium microbatteries Adv. Funct. Mater. 28 1704880
|
[99] |
Zhou G, Paek E, Hwang G S and Manthiram A 2015 Long-life Li/polysulphide batteries with high sulphur loading enabled by lightweight three-dimensional nitrogen/sulphur-codoped graphene sponge Nat. Commun. 6 7760
|
[100] |
Jin C, Zhang W, Zhuang Z, Wang J, Huang H, Gan Y, Xia Y, Liang C, Zhang J and Tao X 2017 Enhanced sulfide chemisorption using boron and oxygen dually doped multi-walled carbon nanotubes for advanced lithium–sulfur batteries J. Mater. Chem. A 5 632–40
|
[101] |
Song J, Yu Z, Gordin M L and Wang D 2016 Advanced sulfur cathode enabled by highly crumpled nitrogen-doped graphene sheets for high-energy-density lithium–sulfur batteries Nano Lett. 16 864–70
|
[102] |
Liang C, Dudney N J and Howe J Y 2009 Hierarchically structured sulfur/carbon nanocomposite material for high-energy lithium battery Chem. Mater. 21 4724–30
|
[103] |
Wei Seh Z, Li W, Cha J J, Zheng G, Yang Y, McDowell M T, Hsu P-C and Cui Y 2013 Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries Nat. Commun. 4 1331
|
[104] |
Mei S, Jafta C J, Lauermann I, Ran Q, Kärgell M, Ballauff M and Lu Y 2017 Porous Ti4O7 particles with interconnected-pore structure as a high-efficiency polysulfide mediator for lithium–sulfur batteries Adv. Funct. Mater. 27 1701176
|
[105] |
Li Z, Guan B Y, Zhang J and Lou X W D 2017 A compact nanoconfined sulfur cathode for high-performance lithium-sulfur batteries Joule 1 576–87
|
[106] |
Rehman S, Tang T, Ali Z, Huang X and Hou Y 2017 Integrated design of MnO2@carbon hollow nanoboxes to synergistically encapsulate polysulfides for empowering lithium sulfur batteries Small 13 1700087
|
[107] |
Luo D et al 2019 Synergistic engineering of defects and architecture in binary metal chalcogenide toward fast and reliable lithium–sulfur batteries Adv. Energy Mater. 9 1900228
|
[108] |
Ji X, Evers S, Black R and Nazar L F 2011 Stabilizing lithium–sulphur cathodes using polysulphide reservoirs Nat. Commun. 2 325
|
[109] |
Liang X, Kwok C Y, Lodi-Marzano F, Pang Q, Cuisinier M, Huang H, Hart C J, Houtarde D, Kaup K and Sommer H 2016 Tuning transition metal oxide–sulfur interactions for long life lithium sulfur batteries: the “Goldilocks” principle Adv. Energy Mater. 6 1501636
|
[110] |
Fan Q, Liu W, Weng Z, Sun Y and Wang H 2015 Ternary hybrid material for high-performance lithium–sulfur battery J. Am. Chem. Soc. 137 12946–53
|
[111] |
Zhao C, Shen C, Xin F, Sun Z and Han W 2014 Prussian blue-derived Fe2O3/sulfur composite cathode for lithium–sulfur batteries Mater. Lett. 137 52–55
|
[112] |
Cheng H, Wang S, Tao D and Wang M 2014 Sulfur/Co3O4 nanotube composite with high performances as cathode materials for lithium sulfur batteries Funct. Mater. Lett. 7 1450020
|
[113] |
Liang X, Hart C, Pang Q, Garsuch A, Weiss T and Nazar L F 2015 A highly efficient polysulfide mediator for lithium–sulfur batteries Nat. Commun. 6 5682
|
[114] |
Wang S et al 2019 Designing a highly efficient polysulfide conversion catalyst with paramontroseite for high-performance and long-life lithium–sulfur batteries Nano Energy 57 230–40
|
[115] |
Chang Z, Dou H, Ding B, Wang J, Wang Y, Hao X and MacFarlane D R 2017 Co3O4 nanoneedle arrays as a multifunctional “super-reservoir” electrode for long cycle life Li–S batteries J. Mater. Chem. A 5 250–7
|
[116] |
Guo J, Zhao S, Shen Y, Shao G and Zhang F 2020 “Room-like” TiO2 array as a sulfur host for lithium−sulfur batteries: combining advantages of array and closed structures ACS Sustain. Chem. Eng. 8 7609–16
|
[117] |
Yuan Z, Peng H, Hou T, Huang J, Chen C, Wang D, Cheng X, Wei F and Zhang Q 2016 Powering lithium–sulfur battery performance by propelling polysulfide redox at sulfiphilic hosts Nano Lett. 16 519–27
|
[118] |
Chen T et al 2017 Metallic and polar Co9S8 inlaid carbon hollow nanopolyhedra as efficient polysulfide mediator for lithium−sulfur batteries Nano Energy 38 239–48
|
[119] |
Wang H, Zhang Q, Yao H, Liang Z, Lee H-W, Hsu P-C, Zheng G and Cui Y 2014 High electrochemical selectivity of edge versus terrace sites in two-dimensional layered MoS2 materials Nano Lett. 14 7138–44
|
[120] |
Lei T, Chen W, Huang J, Yan C, Sun H, Wang C, Zhang W, Li Y and Xiong J 2017 Multi-functional layered WS2 nanosheets for enhancing the performance of lithium–sulfur batteries Adv. Energy Mater. 7 1601843
|
[121] |
Sun T, Huang C, Shu H, Luo L, Liang Q, Chen M, Su J and Wang X 2020 Porous NiCo2S4 nanoneedle arrays with highly efficient electrocatalysis anchored on carbon cloths as self-supported hosts for high-loading Li–S batteries ACS Appl. Mater. Interfaces 12 57975–86
|
[122] |
Wang J, Zhao Y, Li G, Luo D, Liu J, Zhang Y, Wang X, Shui L and Chen Z 2021 Aligned sulfur-deficient ZnS1-x nanotube arrays as efficient catalyzer for high-performance lithium/sulfur batteries Nano Energy 84 105891
|
[123] |
Ye Z, Jiang Y, Li L, Wu F and Chen R 2022 Synergetic anion vacancies and dense heterointerfaces into bimetal chalcogenide nanosheet arrays for boosting electrocatalysis sulfur conversion Adv. Mater. 34 2109552
|
[124] |
Abdelkader A A, Rodene D D, Norouzi N, Alzharani A, Weeraratne K S, Gupta R B and El-Kaderi H M 2020 Multifunctional electrocatalytic cathodes derived from metal–organic frameworks for advanced lithium-sulfur batteries Chem. Eur. J. 26 13896–903
|
[125] |
Huang S, von Lim Y, Zhang X, Wang Y, Zheng Y, Kong D, Ding M, Yang S A and Yang H Y 2018 Regulating the polysulfide redox conversion by iron phosphide nanocrystals for high-rate and ultrastable lithium–sulfur battery Nano Energy 51 340–8
|
[126] |
Luo Y, Luo N, Kong W, Wu H, Wang K, Fan S, Duan W and Wang J 2018 Multifunctional interlayer based on molybdenum diphosphide catalyst and carbon nanotube film for lithium–sulfur batteries Small 14 1702853
|
[127] |
Xiao K, Chen Z, Liu Z, Zhang L, Cai X, Song C, Fan Z, Chen X, Liu J and Shen Z X 2020 N-doped carbon sheets arrays embedded with CoP nanoparticles as high-performance cathode for Li–S batteries via triple synergistic effects J. Power Sources 455 227959
|
[128] |
Shen J et al 2019 Mechanistic understanding of metal phosphide host for sulfur cathode in high-energy-density lithium–sulfur batteries ACS Nano 13 8986–96
|
[129] |
Hao B, Li H, Lv W, Zhang Y, Niu S, Qi Q, Xiao S, Li J, Kang F and Yang Q 2019 Reviving catalytic activity of nitrides by the doping of the inert surface layer to promote polysulfide conversion in lithium–sulfur batteries Nano Energy 60 305–11
|
[130] |
Zha C, Zhu X, Deng J, Zhou Y, Li Y, Chen J, Ding P, Hu Y, Li Y and Chen H 2020 Facet-tailoring five-coordinated Ti sites and structure-optimizing electron transfer in a bifunctional cathode with titanium nitride nanowire array to boost the performance of Li2S6-based lithium–sulfur batteries Energy Storage Mater. 26 40–45
|
[131] |
Zhong Y, Chao D, Deng S, Zhan J, Fang R, Xia Y, Wang Y, Wang X, Xia X and Tu J 2018 Confining sulfur in integrated composite scaffold with highly porous carbon fibers/vanadium nitride arrays for high-performance lithium–sulfur batteries Adv. Funct. Mater. 28 1706391
|
[132] |
Cai D, Zhuang Y, Fei B, Zhang C, Wang Y, Chen Q and Zhan H 2022 Self-supported VN arrays coupled with N-doped carbon nanotubes embedded with Co nanoparticles as a multifunctional sulfur host for lithium–sulfur batteries J. Chem. Eng. 430 132931
|
[133] |
Xiao K, Wang J, Chen Z, Qian Y, Liu Z, Zhang L, Chen X, Liu J, Fan X and Shen Z X 2019 Improving polysulfides adsorption and redox kinetics by the Co4N nanoparticle/N-doped carbon composites for lithium–sulfur batteries Small 15 1901454
|
[134] |
Fang D, Wang Y, Qian C, Liu X, Wang X, Chen S and Zhang S 2019 Synergistic regulation of polysulfides conversion and deposition by MOF-derived hierarchically ordered carbonaceous composite for high-energy lithium–sulfur batteries Adv. Funct. Mater. 29 1900875
|
[135] |
Sun Z et al 2020 Catalytic polysulfide conversion and physiochemical confinement for lithium–sulfur batteries Adv. Energy Mater. 10 1904010
|
[136] |
Qin B, Cai Y, Si X, Li C, Cao J, Fei W, Xie H and Qi J 2021 All-in-one sulfur host: smart controls of architecture and composition for accelerated liquid–solid redox conversion in lithium–sulfur batteries ACS Appl. Mater. Interfaces 13 39424–34
|
[137] |
Niu S et al 2020 Freestanding agaric-like molybdenum carbide/graphene/N-doped carbon foam as effective polysulfide anchor and catalyst for high performance lithium sulfur batteries Energy Storage Mater. 33 73–81
|
[138] |
Wang M, Fan L, Wu X, Qiu Y, Guan B, Wang Y, Zhang N and Sun K 2019 Metallic NiSe2 nanoarrays towards ultralong life and fast Li2S oxidation kinetics of Li–S batteries J. Mater. Chem. A 7 15302–8
|
[139] |
Zheng H, Li Y, Liu H, Yin X and Li Y 2011 Construction of heterostructure materials toward functionality Chem. Soc. Rev. 40 4506–24
|
[140] |
Song Y, Zhao W, Kong L, Zhang L, Zhu X, Shao Y, Ding F, Zhang Q, Sun J and Liu Z 2018 Synchronous immobilization and conversion of polysulfides on a VO2–VN binary host targeting high sulfur load Li–S batteries Energy Environ. Sci. 11 2620–30
|
[141] |
Wang Z, Yu K, Feng Y, Qi R, Ren J and Zhu Z 2019 VO2 (p)-V2C (MXene) grid structure as a lithium polysulfide catalytic host for high-performance Li–S battery ACS Appl. Mater. Interfaces 11 44282–92
|
[142] |
Fang D et al 2021 Combination of heterostructure with oxygen vacancies in Co@CoO1-x nanosheets array for high-performance lithium sulfur batteries J. Chem. Eng. 411 128546
|
[143] |
Zhang H, Zhao Z, Hou Y-N, Tang Y, Liang J, Liu X, Zhang Z, Wang X and Qiu J 2019 Highly stable lithium–sulfur batteries based on p–n heterojunctions embedded on hollow sheath carbon propelling polysulfides conversion J. Mater. Chem. A 7 9230–40
|
[144] |
Ye H and Lee J Y 2020 Solid additives for improving the performance of sulfur cathodes in lithium–sulfur batteries–adsorbents, mediators, and catalysts Small Methods 4 1900864
|
[145] |
Wang Q, Wen Z, Yang J, Jin J, Huang X, Wu X and Han J 2016 Electronic and ionic co-conductive coating on the separator towards high-performance lithium–sulfur batteries J. Power Sources 306 347–53
|
[146] |
Huang J, Zhang Q and Wei F 2015 Multi-functional separator/interlayer system for high-stable lithium–sulfur batteries: progress and prospects Energy Storage Mater. 1 127–45
|
[147] |
Li S, Zhang W, Zheng J, Lv M, Song H and Du L 2021 Inhibition of polysulfide shuttles in Li–S batteries: modified separators and solid-state electrolytes Adv. Energy Mater. 11 2000779
|
[148] |
Liu X, Huang J Q, Zhang Q and Mai L 2017 Nanostructured metal oxides and sulfides for lithium–sulfur batteries Adv. Mater. 29 1601759
|
[149] |
Li M, Wei J, Ren L, Zhao Y, Shang Z, Zhou D, Liu W, Luo L and Sun X 2021 Superwetting behaviors at the interface between electrode and electrolyte Cell Rep. Phys. Sci. 2 100374
|
[150] |
Xiao Z et al 2021 Empowering polypropylene separator with enhanced polysulfide adsorption and reutilization ability for high-performance Li-S batteries Mater. Res. Bull. 134 111108
|
[151] |
Shi M et al 2022 A Mott–Schottky heterogeneous layer for Li–S batteries: enabling both high stability and commercial-sulfur utilization Adv. Energy Mater. 12 2103657
|
[152] |
Kong Z, Lin Y, Hu J, Wang Y and Zhan L 2022 Phosphorus doped hierarchical porous carbon nanosheet array as an electrocatalyst to enhance polysulfides anchoring and conversion J. Chem. Eng. 436 132719
|
[153] |
Deng C, Wang Z, Wang S, Yu J, Martin D J, Nanjundan A K and Yamauchi Y 2019 Double-layered modified separators as shuttle suppressing interlayers for lithium–sulfur batteries ACS Appl. Mater. Interfaces 11 541–9
|
[154] |
Huang S, Wang Y, Hu J, von Lim Y, Kong D, Guo L, Kou Z, Chen Y and Yang H Y 2019 In situ-grown compressed NiCo2S4 barrier layer for efficient and durable polysulfide entrapment npg Asia Mater. 11 55
|
[155] |
Wang Q, Liu B, Shen Y, Wu J, Zhao Z, Zhong C and Hu W 2021 Confronting the challenges in lithium anodes for lithium metal batteries Adv. Sci. 8 2101111
|
[156] |
Ren L, Cao X, Wang Y, Zhou M, Liu W, Xu H, Zhou H and Sun X 2023 3D porous and Li-rich Sn–Li alloy scaffold with mixed ionic-electronic conductivity for dendritefree lithium metal anodes J. Alloys Compd. 947 169362
|
[157] |
Wang Q et al 2023 Ultrathin composite Li electrode for high-performance Li metal batteries: a review from synthetic chemistry Adv. Funct. Mater. 33 2213648
|
[158] |
Jinli Q, Longtao R, Xin C, Yajun Z, Haijun X, Wen L and Xiaoming S 2020 Porous copper foam co-operation with thiourea for dendrite-free lithium metal anode Acta Phys.-Chim. Sin. 37 2009020
|
[159] |
Wang Y, Ren L, Liu J, Lu X, Wang Q, Zhou M, Liu W and Sun X 2022 In situ construction of composite artificial solid electrolyte interphase for high-performance lithium metal batteries ACS Appl. Mater. Interfaces 14 50982–91
|
[160] |
Yang C, Yin Y, Zhang S, Li N and Guo Y 2015 Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes Nat. Commun. 6 8058
|
[161] |
Luo Z, Li S, Yang L, Tian Y, Xu L, Zou G, Hou H, Wei W, Chen L and Ji X 2021 Interfacially redistributed charge for robust lithium metal anode Nano Energy 87 106212
|
[162] |
Xu P et al 2020 High reversible Li plating and stripping by in-situ construction a multifunctional lithium-pinned array Energy Storage Mater. 28 188–95
|
[163] |
Chen Y, Elangovan A, Zeng D, Zhang Y, Ke H, Li J, Sun Y and Cheng H 2020 Vertically aligned carbon nanofibers on Cu foil as a 3D current collector for reversible Li plating/stripping toward high-performance Li–S batteries Adv. Funct. Mater. 30 1906444
|
[164] |
Zhang C, Lv W, Zhou G, Huang Z, Zhang Y, Lyu R, Wu H, Yun Q, Kang F and Yang Q H 2018 Vertically aligned lithiophilic CuO nanosheets on a Cu collector to stabilize lithium deposition for lithium metal batteries Adv. Energy Mater. 8 1703404
|
[165] |
Xie D, Li H, Diao W, Jiang R, Tao F, Sun H, Wu X and Zhang J 2021 Spatial confinement of vertical arrays of lithiophilic SnS2 nanosheets enables conformal Li nucleation/growth towards dendrite-free Li metal anode Energy Storage Mater. 36 504–13
|
[166] |
Yan C, Cheng X, Zhao C, Huang J, Yang S and Zhang Q 2016 Lithium metal protection through in-situ formed solid electrolyte interphase in lithium–sulfur batteries: the role of polysulfides on lithium anode J. Power Sources 327 212–20
|
[167] |
Bhargav A, He J, Gupta A and Manthiram A 2020 Lithiumsulfur batteries: attaining the critical metrics Joule 4 285–91
|
[168] |
Bonnick P and Muldoon J 2020 The Dr Jekyll and Mr Hyde of lithium sulfur batteries Energy Environ. Sci. 13 4808–33
|
[169] |
Liu B, Fang R, Xie D, Zhang W, Huang H, Xia Y, Wang X, Xia X and Tu J 2018 Revisiting scientific issues for industrial applications of lithium–sulfur batteries Energy Environ. Mater. 1 196–208
|
[170] |
Hu G, Sun Z, Shi C, Fang R, Chen J, Hou P, Liu C, Cheng H M and Li F 2017 A sulfur-rich copolymer@CNT hybrid cathode with dual-confinement of polysulfides for high-performance lithium–sulfur batteries Adv. Mater. 29 1603835
|
[171] |
Wen X, Lu X, Xiang K, Xiao L, Liao H, Chen W, Zhou W and Chen H 2019 Nitrogen/sulfur co-doped ordered carbon nanoarrays for superior sulfur hosts in lithium–sulfur batteries J. Colloid Interface Sci. 554 711–21
|
[172] |
Li J, Chen Y, Zhang S, Xie W, Xu S-M, Wang G and Shao M 2020 Coordinating adsorption and catalytic activity of polysulfide on hierarchical integrated electrodes for high-performance flexible Li–S batteries ACS Appl. Mater. Interfaces 12 49519–29
|
[173] |
Yan Y, Lei T, Jiao Y, Wu C and Xiong J 2018 TiO2 nanowire array as a polar absorber for high-performance lithium–sulfur batteries Electrochim. Acta 264 20–25
|
[174] |
Liu Y, Sun C, Zhang L, Zheng P, Meng Q, Zhang C, Ye X, Jiang J and Li C M 2022 High S filling and binder-free cathodes enabled by thick arrayed nanoframeworks and subtle interfacial engineering ACS Appl. Energy Mater. 5 1313–21
|
[175] |
Chen S, Zhang J, Wang Z, Nie L, Hu X, Yu Y and Liu W 2021 Electrocatalytic NiCo2O4 nanofiber arrays on carbon cloth for flexible and high-loading lithium–sulfur batteries Nano Lett. 21 5285–92
|
[176] |
Zhou J, Yang X, Zhang Y, Jia J, He X, Yu L, Pan Y, Liao J, Sun M and He J 2021 Interconnected NiCo2O4 nanosheet arrays grown on carbon cloth as a host, adsorber and catalyst for sulfur species enabling high-performance Li–S batteries Nanoscale Adv. 3 1690–8
|
[177] |
Shan X, Guo Z, Zou Y and Zhao L 2021 Reduced graphene oxide-coated zinc–cobalt oxide nanosheet arrays with N-doped carbon anchored on carbon cloths as cathode materials for high-sulfur-loading Li–S batteries ACS Appl. Nano Mater. 4 11526–36
|
[178] |
Cao Z, Guo J, Jia J, Zhang Z, Yin Y, Yang M and Yang S 2022 In situ self-boosting catalytic synthesizing free-standing N,S rich transition metal sulfide/hierarchical CNF-CNT architectures enable high-performance lithium–sulfur batteries Electrochim. Acta 422 140549
|
[179] |
Zhang X, Wei Y, Wang B, Wang M, Zhang Y, Wang Q and Wu H 2019 Construction of electrocatalytic and heat-resistant self-supporting electrodes for high-performance lithium–sulfur batteries Nano-Micro Lett. 11 1–17
|
[180] |
Xiong M, Qian J, Yang K, Chen Z, Mei T, Wang J, Li J, Yu L and Wang X 2020 Efficient polysulfide anchor: brain coral-like WS2 nanosheets J. Mater. Sci. 55 12031–40
|
[181] |
Jin J, Cai W, Cai J, Shao Y, Song Y, Xia Z, Zhang Q and Sun J 2020 MOF-derived hierarchical CoP nanoflakes anchored on vertically erected graphene scaffolds as self-supported and flexible hosts for lithium–sulfur batteries J. Mater. Chem. A 8 3027–34
|
[182] |
Wang Z, Yu K, Gong S, Du E and Zhu Z 2020 Vanadium based carbide–oxide heterogeneous V2O5@V2C nanotube arrays for high-rate and long-life lithium–sulfur batteries Nanoscale 12 18950–64
|
[183] |
Qiu S, Wang C, Jiang Z, Zhang L, Gu L, Wang K, Gao J, Zhu X and Wu G 2020 Rational design of MXene@TiO2 nanoarray enabling dual lithium polysulfide chemisorption towards high-performance lithium–sulfur batteries Nanoscale 12 16678–84
|
[184] |
Wang M, Fan L, Tian D, Wu X, Qiu Y, Zhao C, Guan B, Wang Y, Zhang N and Sun K 2018 Rational design of hierarchical SnO2/1T-MoS2 nanoarray electrode for ultralong-life Li–S batteries ACS Energy Lett. 3 1627–33
|
[185] |
Qiu Y et al 2021 Constructed conductive CoSe2 nanoarrays as efficient electrocatalyst for high-performance Li–S battery Rare Met. 40 3147–55
|