Volume 1 Issue 4
December  2022
Turn off MathJax
Article Contents
Sajad Vafaeenezhad, Amir Reza Hanifi, Miguel A Laguna-Bercero, Thomas H Etsell, Partha Sarkar. Microstructure and long-term stability of Ni–YSZ anode supported fuel cells: a review[J]. Materials Futures, 2022, 1(4): 042101. doi: 10.1088/2752-5724/ac88e7
Citation: Sajad Vafaeenezhad, Amir Reza Hanifi, Miguel A Laguna-Bercero, Thomas H Etsell, Partha Sarkar. Microstructure and long-term stability of Ni–YSZ anode supported fuel cells: a review[J]. Materials Futures, 2022, 1(4): 042101. doi: 10.1088/2752-5724/ac88e7
Topical Review •
OPEN ACCESS

Microstructure and long-term stability of Ni–YSZ anode supported fuel cells: a review

© 2022 The Author(s). Published by IOP Publishing Ltd on behalf of the Songshan Lake Materials Laboratory
Materials Futures, Volume 1, Number 4
  • Received Date: 2022-04-20
  • Accepted Date: 2022-08-10
  • Publish Date: 2022-11-04
  • Nickel–yttria stabilized zirconia (Ni–YSZ) cermet is the most commonly used anode in solid oxide fuel cells (SOFCs). The current article provides an insight into parameters which affect cell performance and stability by reviewing and discussing the related publications in this field. Understanding the parameters which affect the microstructure of Ni–YSZ such as grain size (Leng et al 2003 J. Power Sources 117 26–34) and ratio of Ni to YSZ, volume fraction of porosity, pore size and its distribution, tortuosity factor, characteristic pathway diameter and density of triple phase boundaries is the key to designing a fuel cell which shows high electrochemical performance. Lack of stability has been the main barrier to commercialization of SOFC technology. Parameters influencing the degradation of Ni–YSZ supported SOFCs such as Ni migration inside the anode during prolonged operation are discussed. The longest Ni-supported SOFC tests reported so far are examined and the crucial role of chromium poisoning due to interconnects, stack design and operating conditions in degradation of SOFCs is highlighted. The importance of calcination and milling of YSZ to development of porous structures suitable for Ni infiltration is explained and several methods to improve the electrochemical performance and stability of Ni–YSZ anode supported SOFCs are suggested.

  • loading
  • [1]
    Ng K H, Rahman H A and Somalu M R 2019 Review: enhancement of composite anode materials for low-temperature solid oxide fuels Int. J. Hydrog. Energy 44 30692–704
    [2]
    Zakaria Z, Awang Mat Z, Abu Hassan S H and Boon Kar Y 2020 A review of solid oxide fuel cell component fabrication methods toward lowering temperature Int. J. Energy Res. 44 594–611
    [3]
    Khan M S, Lee S-B, Song R-H, Lee J-W, Lim T-H and Park S-J 2016 Fundamental mechanisms involved in the degradation of nickel–yttria stabilized zirconia (Ni–YSZ) anode during solid oxide fuel cells operation: a review Ceram. Int. 42 35–48
    [4]
    Jiang S P and Chen X 2014 Chromium deposition and poisoning of cathodes of solid oxide fuel cells—a review Int. J. Hydrog. Energy 39 505–31
    [5]
    Shi N, Xie Y, Yang Y, Xue S, Li X, Zhu K, Huan D, Peng R, Xia C and Lu Y 2020 Review of anodic reactions in hydrocarbon fueled solid oxide fuel cells and strategies to improve anode performance and stability Mater. Renew. Sustain. Energy 9 6
    [6]
    Gao Z, Mogni L V, Miller E C, Railsback J G and Barnett S A 2016 A perspective on low-temperature solid oxide fuel cells Energy Environ. Sci. 9 1602–44
    [7]
    Shaigan N, Qu W, Ivey D G and Chen W 2010 A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects J. Power Sources 195 1529–42
    [8]
    Fan L, Zhu B, Su P-C and He C 2018 Nanomaterials and technologies for low temperature solid oxide fuel cells: recent advances, challenges and opportunities Nano Energy 45 148–76
    [9]
    Chen Y, Lin Y, Zhang Y, Wang S, Su D, Yang Z, Han M and Chen F 2014 Low temperature solid oxide fuel cells with hierarchically porous cathode nano-network Nano Energy 8 25–33
    [10]
    Jiang S P and Badwal S P S 1999 An electrode kinetics study of H2 oxidation on Ni/Y2O3–ZrO2 cermet electrode of the solid oxide fuel cell Solid State Ion. 123 209–24
    [11]
    Verda V and Ciano C 2008 Tubular cells and stacks Modeling Solid Oxide Fuel Cells: Methods, Procedures and Techniques ed R Bove and S Ubertini (Dordrecht: Springer Netherlands) pp 207–38
    [12]
    Tanasini P, Cannarozzo M, Costamagna P, Faes A, van Herle J, Hessler-Wyser A and Comninellis C 2009 Experimental and theoretical investigation of degradation mechanisms by particle coarsening in SOFC electrodes Fuel Cells 9 740–52
    [13]
    Abdeljawad F and Haataja M 2013 Microstructural coarsening effects on redox instability and mechanical damage in solid oxide fuel cell anodes J. Appl. Phys. 114 183519
    [14]
    Hanifi A R, Paulson S, Torabi A, Shinbine A, Tucker M C, Birss V, Etsell T H and Sarkar P 2014 Slip-cast and hot-solution infiltrated porous yttria stabilized zirconia (YSZ) supported tubular fuel cells J. Power Sources 266 121–31
    [15]
    Abdeljawad F, Völker B, Davis R, McMeeking R M and Haataja M 2014 Connecting microstructural coarsening processes to electrochemical performance in solid oxide fuel cells: an integrated modeling approach J. Power Sources 250 319–31
    [16]
    Chen-Wiegart Y-C K, Kennouche D, Scott Cronin J, Barnett S A and Wang J 2016 Effect of Ni content on the morphological evolution of Ni–YSZ solid oxide fuel cell electrodes Appl. Phys. Lett. 108 083903
    [17]
    Xiao G and Chen F 2014 Redox stable anodes for solid oxide fuel cells Front. Energy Res. 2 1–13
    [18]
    Jiang S P 2003 Sintering behavior of Ni/Y2O3–ZrO2 cermet electrodes of solid oxide fuel cells J. Mater. Sci. 38 3775–82
    [19]
    Haile S M 2003 Fuel cell materials and components Acta Mater. 51 5981–6000
    [20]
    Singh B, Ghosh S, Aich S and Roy B 2017 Low temperature solid oxide electrolytes (LT-SOE): a review J. Power Sources 339 103–35
    [21]
    Thyden K, Liu Y L and Bilde-Sorensen J B 2008 Microstructural characterization of SOFC Ni–YSZ anode composites by low-voltage scanning electron microscopy Solid State Ion. 178 1984–9
    [22]
    Hanna J, Lee W Y, Shi Y and Ghoniem A F 2014 Fundamentals of electro- and thermochemistry in the anode of solid-oxide fuel cells with hydrocarbon and syngas fuels Prog. Energy Combust. Sci. 40 74–111
    [23]
    Mahato N, Banerjee A, Gupta A, Omar S and Balani K 2015 Progress in material selection for solid oxide fuel cell technology: a review Prog. Mater. Sci. 72 141–337
    [24]
    Shri Prakash B, Senthil Kumar S and Aruna S T 2014 Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: a review Renew. Sustain. Energy Rev. 36 149–79
    [25]
    Jiang S P and Badwal S P S 1997 Hydrogen oxidation at the nickel and platinum electrodes on yttria-tetragonal zirconia electrolyte J. Electrochem. Soc. 144 3777–84
    [26]
    Rafique M, Nawaz H, Shahid Rafique M, Bilal Tahir M, Nabi G and Khalid N R 2019 Material and method selection for efficient solid oxide fuel cell anode: recent advancements and reviews Int. J. Energy Res. 43 2423–46
    [27]
    Jiang S P 2003 A comparative study of fabrication and performance of Ni/3 mol % Y2 O3 ZrO2 and Ni/8 mol % Y2 O3 ZrO2 cermet electrodes J. Electrochem. Soc. 150 E548
    [28]
    Vafaeenezhad S, Sandhu N K, Hanifi A R, Etsell T H and Sarkar P 2019 Development of proton conducting fuel cells using nickel metal support J. Power Sources 435 226763
    [29]
    Zhao F and Virkar A V 2005 Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters J. Power Sources 141 79–95
    [30]
    Atkinson A, Barnett S, Gorte R J, Irvine J T S, McEvoy A J, Mogensen M, Singhal S C and Vohs J 2004 Advanced anodes for high-temperature fuel cells Nat. Mater. 3 17–27
    [31]
    Brown M, Primdahl S and Mogensen M 2000 Structure/performance relations for Ni/yttria-stabilized zirconia anodes for solid oxide fuel cells J. Electrochem. Soc. 147 475
    [32]
    Deseure J, Bultel Y, Dessemond L and Siebert E 2005 Theoretical optimisation of a SOFC composite cathode Electrochim. Acta 50 2037–46
    [33]
    Yu J H, Park G W, Lee S and Woo S K 2007 Microstructural effects on the electrical and mechanical properties of Ni–YSZ cermet for SOFC anode J. Power Sources 163 926–32
    [34]
    Hanifi A R, Laguna-Bercero M A, Sandhu N K, Etsell T H and Sarkar P 2016 Tailoring the microstructure of a solid oxide fuel cell anode support by calcination and milling of YSZ Sci. Rep. 6 27359
    [35]
    Morales M and Laguna-Bercero M A 2018 Influence of ´ anode functional layers on electrochemical performance and mechanical strength in microtubular solid oxide fuel cells fabricated by gel-casting ACS Appl. Energy Mater. 1 2024–31
    [36]
    Laguna-Bercero M A 2012 Recent advances in high temperature electrolysis using solid oxide fuel cells: a review J. Power Sources 203 4–16
    [37]
    Koide H, Someya Y, Yoshida T and Maruyama T 2000 Properties of Ni/YSZ cermet as anode for SOFC Solid State Ion. 132 253–60
    [38]
    Wilson J R and Barnett S A 2008 Solid oxide fuel cell Ni–YSZ anodes: effect of composition on microstructure and performance Electrochem. Solid-State Lett. 11 B181
    [39]
    Lee J H, Moon H, Lee H W, Kim J, Kim J D and Yoon K H 2002 Quantitative analysis of microstructure and its related electrical property of SOFC anode, Ni–YSZ cermet Solid State Ion. 148 15–26
    [40]
    Xi X, Abe H and Naito M 2014 Effect of composition on microstructure and polarization resistance of solid oxide fuel cell anode Ni–YSZ composites made by co-precipitation Ceram. Int. 40 16549–55
    [41]
    Vivet N, Chupin S, Estrade E, Richard A, Bonnamy S, Rochais D and Bruneton E 2011 Effect of Ni content in SOFC Ni–YSZ cermets: a three-dimensional study by FIB-SEM tomography J. Power Sources 196 9989–97
    [42]
    Hong H S, Chae U-S and Choo S-T 2008 The effect of ball milling parameters and Ni concentration on a YSZ-coated Ni composite for a high temperature electrolysis cathode J. Alloys Compd. 449 331–4
    [43]
    Pratihar S K, Dassharma A and Maiti H S 2005 Processing microstructure property correlation of porous Ni–YSZ cermets anode for SOFC application Mater. Res. Bull. 40 1936–44
    [44]
    Clemmer R M C and Corbin S F 2009 The influence of pore and Ni morphology on the electrical conductivity of porous Ni/YSZ composite anodes for use in solid oxide fuel cell applications Solid State Ion. 180 721–30
    [45]
    Minh N Q 1993 Ceramic fuel cells J. Am. Ceram. Soc. 76 563–88
    [46]
    Morales M, Laguna-Bercero M A, Navarro M E, Espiell F and Segarra M 2015 The effect of anode support on the electrochemical performance of microtubular solid oxide fuel cells fabricated by gel-casting RSC Adv. 5 39350–7
    [47]
    Morales M and Laguna-Bercero M A 2017 Microtubular solid oxide fuel cells fabricated by gel-casting: the role of supporting microstructure on the mechanical properties RSC Adv. 7 17620–8
    [48]
    Monzón H, Laguna-Bercero M A, Larrea A, Arias B I, Várez A and Levenfeld B 2014 Design of industrially scalable microtubular solid oxide fuel cells based on an extruded support Int. J. Hydrog. Energy 39 5470–6
    [49]
    Laguna-Bercero M A, Hanifi A R, Menand L, Sandhu N K, Anderson N E, Etsell T H and Sarkar P 2018 The effect of pore-former morphology on the electrochemical performance of solid oxide fuel cells under combined fuel cell and electrolysis modes Electrochim. Acta 268 195–201
    [50]
    Jørgensen P S, Ebbehøj S L and Hauch A 2015 Triple phase boundary specific pathway analysis for quantitative characterization of solid oxide cell electrode microstructure J. Power Sources 279 686–93
    [51]
    Trini M, Jørgensen P S, Hauch A, Chen M and Hendriksen P V 2017 Microstructural characterization of Ni/YSZ electrodes in a solid oxide electrolysis stack tested for 9000 hours ECS Trans. 78 3049–64
    [52]
    Trini M, Jørgensen P S, Hauch A, Bentzen J J, Hendriksen P V and Chen M 2019 3D microstructural characterization of Ni/YSZ electrodes exposed to 1 year of electrolysis testing J. Electrochem. Soc. 166 F158–67
    [53]
    Iwai H et al 2010 Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique J. Power Sources 195 955–61
    [54]
    Kishimoto M, Iwai H, Saito M and Yoshida H 2011 Quantitative evaluation of solid oxide fuel cell porous anode microstructure based on focused ion beam and scanning electron microscope technique and prediction of anode overpotentials J. Power Sources 196 4555–63
    [55]
    Wilson J R, Kobsiriphat W, Mendoza R, Chen H-Y, Hiller J M, Miller D J, Thornton K, Voorhees P W, Adler S B and Barnett S A 2006 Three-dimensional reconstruction of a solid-oxide fuel-cell anode Nat. Mater. 5 541–4
    [56]
    Izzo J R, Joshi A S, Grew K N, Chiu W K S, Tkachuk A, Wang S H and Yun W 2008 Nondestructive reconstruction and analysis of SOFC anodes using x-ray computed tomography at sub-50 nm resolution J. Electrochem. Soc. 155 B504
    [57]
    Chen H-Y, Yu H-C, Scott Cronin J, Wilson J R, Barnett S A and Thornton K 2011 Simulation of coarsening in three-phase solid oxide fuel cell anodes J. Power Sources 196 1333–7
    [58]
    Kishimoto M, Miyawaki K, Iwai H, Saito M and Yoshida H 2013 Effect of composition ratio of Ni–YSZ anode on distribution of effective three-phase boundary and power generation performance Fuel Cells 13 476–86
    [59]
    Pihlatie M H, Kaiser A, Mogensen M and Chen M 2011 Electrical conductivity of Ni–YSZ composites: degradation due to Ni particle growth Solid State Ion. 189 82–90
    [60]
    Lee Y-H, Muroyama H, Matsui T and Eguchi K 2014 Degradation of nickel-yttria-stabilized zirconia anode in solid oxide fuel cells under changing temperature and humidity conditions J. Power Sources 262 451–6
    [61]
    Cheng S-W, Tsai C-H, Wu S-H, Liu C-K, Cheng Y-N and Lee R-Y 2015 Effects of reduction process on the electrochemical and microstructural properties for electrolyte-supported SOFC Int. J. Hydrog. Energy 40 1534–40
    [62]
    Monzón H and Laguna-Bercero M A 2016 The influence of the reducing conditions on the final microstructure and performance of nickel-yttria stabilized zirconia cermets Electrochim. Acta 221 41–47
    [63]
    Li T S, Wang W G, Miao H, Chen T and Xu C 2010 Effect of reduction temperature on the electrochemical properties of a Ni/YSZ anode-supported solid oxide fuel cell J. Alloys Compd. 495 138–43
    [64]
    Jiao Z and Shikazono N 2015 Quantitative study on the correlation between solid oxide fuel cell Ni–YSZ composite anode performance and reduction temperature based on three-dimensional reconstruction J. Electrochem. Soc. 162 F571–8
    [65]
    Skinner S J 2019 Recent advances in the understanding of the evolution of surfaces and interfaces in solid oxide cells Adv. Mater. Interfaces 6 1–7
    [66]
    Liu -S-S, Jiao Z, Shikazono N, Matsumura S and Koyama M 2015 Observation of the Ni/YSZ interface in a conventional SOFC J. Electrochem. Soc. 162 F750–4
    [67]
    Revcolevschi A and Dhalenne G 1985 Crystallographically aligned metal-oxide composite made by reduction of a directionally solidified oxide-oxide eutectic Nature 316 335–6
    [68]
    Merino R I, Pena J I, Laguna-Bercero M A, Larrea A and Orera V M 2004 Directionally solidified calcia stabilised zirconia-nickel oxide plates in anode supported solid oxide fuel cells J. Eur. Ceram. Soc. 24 1349–53
    [69]
    Cubero A, Peña J I and Laguna-Bercero M A 2015 Optimization of Ni–YSZ solid oxide fuel cell anodes by surface laser melting Appl. Surf. Sci. 335 39–43
    [70]
    Laguna-Bercero M A, Larrea A, Merino R I, Peña J I and Orera V M 2005 Stability of channeled Ni–YSZ cermets produced from self-assembled NiO–YSZ directionally solidified eutectics J. Am. Ceram. Soc. 88 3215–7
    [71]
    Laguna-Bercero M A and Larrea A 2007 YSZ-induced ´ crystallographic reorientation of Ni particles in Ni–YSZ cermets J. Am. Ceram. Soc. 90 2954–60
    [72]
    Jeangros Q, Faes A, Wagner J B, Hansen T W, Aschauer U, van Herle J, Hessler-Wyser A and Dunin-Borkowski R E 2010 In situ redox cycle of a nickel-YSZ fuel cell anode in an environmental transmission electron microscope Acta Mater. 58 4578–89
    [73]
    Muñoz M C, Gallego S, Beltrán J I and Cerdá J 2006 Adhesion at metal–ZrO2 interfaces Surf. Sci. Rep. 61 303–44
    [74]
    Liu -S-S, Saha L C, Iskandarov A, Ishimoto T, Yamamoto T, Umeno Y, Matsumura S and Koyama M 2019 Atomic structure observations and reaction dynamics simulations on triple phase boundaries in solid-oxide fuel cells Commun. Chem. 2 1–9
    [75]
    Jiang S P, Zhang S, Zhen Y D and Wang W 2005 Fabrication and performance of impregnated Ni anodes of solid oxide fuel cells J. Am. Ceram. Soc. 88 1779–85
    [76]
    Hanifi A R, Zazulak M, Etsell T H and Sarkar P 2012 Effects of calcination and milling on surface properties, rheological behaviour and microstructure of 8mol% yttria-stabilised zirconia (8 YSZ) Powder Technol. 231 35–43
    [77]
    Hanifi A R, Torabi A, Etsell T H, Yamarte L and Sarkar P 2011 Porous electrolyte-supported tubular micro-SOFC design Solid State Ion. 192 368–71
    [78]
    Hanifi A R, Torabi A, Shinbine A, Etsell T H and Sarkar P 2011 Fabrication of thin porous electrolyte-supported tubular fuel cells using slip casting J. Ceram. Process. Res. 12 336–42
    [79]
    Hanifi A R, Shinbine A, Etsell T H and Sarkar P 2012 Development of monolithic YSZ porous and dense layers through multiple slip casting for ceramic fuel cell applications Int. J. Appl. Ceram. Technol. 9 1011–21
    [80]
    Hanifi A R, Zahiri B, Mitlin D, Vincent A L, Etsell T H and Sarkar P 2016 Effects of washing and calcination-milling on ionic release and surface properties of yttria stabilized zirconia Ceram. Int. 42 6755–60
    [81]
    Othman M H D, Droushiotis N, Wu Z, Kelsall G and Li K 2011 High-performance, anode-supported, microtubular SOFC prepared from single-step-fabricated, dual-layer hollow fibers Adv. Mater. 23 2480–3
    [82]
    Ren C, Zhang Y, Xu Q, Tian T and Chen F 2020 Effect of non-solvent from the phase inversion method on the morphology and performance of the anode supported microtubular solid oxide fuel cells Int. J. Hydrog. Energy 45 6926–33
    [83]
    Ab Rahman M et al 2020 Development of high-performance anode/electrolyte/cathode micro-tubular solid oxide fuel cell via phase inversion-based co-extrusion/co-sintering technique J. Power Sources 467 228345
    [84]
    Emley B, Panthi D, Du Y and Yao Y 2020 Controlling porosity of anode support in tubular solid oxide fuel cells by freeze casting J. Electrochem. Energy Convers. Storage 17 1–10
    [85]
    Chen Y, Bunch J, Li T, Mao Z and Chen F 2012 Novel functionally graded acicular electrode for solid oxide cells fabricated by the freeze-tape-casting process J. Power Sources 213 93–99
    [86]
    Sholklapper T Z, Jacobson C P, Visco S J and Dejonghe L C 2008 Synthesis of dispersed and contiguous nanoparticles in solid oxide fuel cell electrodes Fuel Cells 8 303–12
    [87]
    Vohs J M and Gorte R J 2009 High-performance SOFC cathodes prepared by infiltration Adv. Mater. 21 943–56
    [88]
    Jiang S P 2012 Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: advances and challenges Int. J. Hydrog. Energy 37 449–70
    [89]
    Sholklapper T Z, Lu C, Jacobson C P, Visco S J and de Jonghe L C 2006 LSM-infiltrated solid oxide fuel cell cathodes Electrochem. Solid-State Lett. 9 A376–8
    [90]
    Laguna-Bercero M A, Hanifi A R, Etsell T H, Sarkar P and Orera V M 2015 Microtubular solid oxide fuel cells with lanthanum strontium manganite infiltrated cathodes Int. J. Hydrog. Energy 40 5469–74
    [91]
    Burye T E, Tang H and Nicholas J D 2016 The effect of precursor solution desiccation or nano-ceria pre-infiltration on various La0.6Sr0.4FeyCo1-yO3-x infiltrate compositions J. Electrochem. Soc. 163 F1017–22
    [92]
    Shah M and Barnett S A 2008 Solid oxide fuel cell cathodes by infiltration of La0.6Sr0.4Co0.2Fe0.8O3−δ into Gd-doped ceria Solid State Ion. 179 2059–64
    [93]
    Vincent A L, Hanifi A R, Luo J-L, Chuang K T, Sanger A R, Etsell T H and Sarkar P 2012 Porous YSZ impregnated with La0.4Sr0.5Ba0.1TiO3 as a possible composite anode for SOFCs fueled with sour feeds J. Power Sources 215 301–6
    [94]
    Vincent A L, Hanifi A R, Zazulak M, Luo J-L, Chuang K T, Sanger A R, Etsell T and Sarkar P 2013 Preparation and characterization of an solid oxide fuel cell tubular cell for direct use with sour gas J. Power Sources 240 411–6
    [95]
    Choi S, Yoo S, Shin J-Y and Kim G 2011 High performance SOFC cathode prepared by infiltration of Lan+1NinO3n+1 (n = 1, 2, and 3) in porous YSZ J. Electrochem. Soc. 158 B995
    [96]
    Li Y, Zhang S-L, Li C-X, Wei T, Yang G-J, Li C-J and Liu M 2016 La2NiO4+δ infiltration of plasma-sprayed LSCF coating for cathode performance improvement J. Therm. Spray Technol. 25 392–400
    [97]
    Laguna-Bercero M A, Hanifi A R, Monzón H, Cunningham J, Etsell T H and Sarkar P 2014 High performance of microtubular solid oxide fuel cells using Nd2NiO4+δ-based composite cathodes J. Mater. Chem. A 2 9764–70
    [98]
    Chen T, Liu M, Yuan C, Zhou Y, Ye X, Zhan Z, Xia C and Wang S 2015 High performance of intermediate temperature solid oxide electrolysis cells using Nd2NiO4+δ impregnated scandia stabilized zirconia oxygen electrode J. Power Sources 276 1–6
    [99]
    Hanifi A R, Laguna-Bercero M A, Etsell T H and Sarkar P 2014 The effect of electrode infiltration on the performance of tubular solid oxide fuel cells under electrolysis and fuel cell modes Int. J. Hydrog. Energy 39 8002–8
    [100]
    Torabi A, Hanifi A R, Etsell T H and Sarkar P 2011 Effects of porous support microstructure on performance of infiltrated electrodes in solid oxide fuel cells J. Electrochem. Soc. 159 B201–10
    [101]
    Sholklapper T Z, Kurokawa H, Jacobson C P, Visco S J and de Jonghe L C 2007 Nanostructured solid oxide fuel cell electrodes Nano Lett. 7 2136–41
    [102]
    Klemensø T, Thydén K, Chen M and Wang H-J 2010 Stability of Ni-yttria stabilized zirconia anodes based on Ni-impregnation J. Power Sources 195 7295–301
    [103]
    Park S, Gorte R J and Vohs J M 2000 Applications of heterogeneous catalysis in the direct oxidation of hydrocarbons in a solid-oxide fuel cell Appl. Catal. A: Gen. 200 55–61
    [104]
    Sarıbo˘ga V and Faruk Öksüzömer M A 2016 Cu-CeO2 anodes for solid oxide fuel cells: determination of infiltration characteristics J. Alloys Compd. 688 323–31
    [105]
    Tucker M C, Lau G Y, Jacobson C P, DeJonghe L C and Visco S J 2007 Performance of metal-supported SOFCs with infiltrated electrodes J. Power Sources 171 477–82
    [106]
    Corbin S F and Qiao X 2003 Development of solid oxide fuel cell anodes using metal-coated pore-forming agents J. Am. Ceram. Soc. 86 401–6
    [107]
    Howe K S, Hanifi A R, Kendall K, Zazulak M, Etsell T H and Sarkar P 2013 Performance of microtubular SOFCs with infiltrated electrodes under thermal cycling Int. J. Hydrog. Energy 38 1058–67
    [108]
    Buyukaksoy A, Petrovsky V and Dogan F 2011 Redox stable solid oxide fuel cells with Ni–YSZ cermet anodes prepared by polymeric precursor infiltration J. Electrochem. Soc. 159 B232–4
    [109]
    Hanifi A R, Torabi A, Chen X, Hill S, Sarkar P and Etsell T H 2014 Development of redox resistant fully infiltrated tubular SOFCs J. Electrochem. Soc. 161 F391–7
    [110]
    Buyukaksoy A, Kammampata S P and Birss V I 2015 Effect of porous YSZ scaffold microstructure on the long-term performance of infiltrated Ni–YSZ anodes J. Power Sources 287 349–58
    [111]
    Keyvanfar P, Hanifi A R, Sarkar P, Etsell T H and Birss V 2015 Enhancing the stability of infiltrated Ni/YSZ anodes ECS Trans. 68 1255–63
    [112]
    Yue W et al 2019 Enhancing coking resistance of Ni/YSZ electrodes: in situ characterization, mechanism research, and surface engineering Nano Energy 62 64–78
    [113]
    Ganduglia-Pirovano M V, Hofmann A and Sauer J 2007 Oxygen vacancies in transition metal and rare earth oxides: current state of understanding and remaining challenges Surf. Sci. Rep. 62 219–70
    [114]
    Papaefthimiou V et al 2013 On the active surface state of nickel-ceria solid oxide fuel cell anodes during methane electrooxidation Adv. Energy Mater. 3 762–9
    [115]
    Chen X J, Khor K A and Chan S H 2005 Suppression of carbon deposition at CeO2-modified Ni/YSZ anodes in weakly humidified CH4 at 850 ◦C Electrochem. Solid-State Lett. 8 A79
    [116]
    Lyu Z, Wang Y, Zhang Y and Han M 2020 Solid oxide fuel cells fueled by simulated biogas: comparison of anode modification by infiltration and reforming catalytic layer Chem. Eng. J. 393 124755
    [117]
    Chen Y, Bunch J, Jin C, Yang C and Chen F 2012 Performance enhancement of Ni–YSZ electrode by impregnation of Mo0.1Ce0.9O2+δ J. Power Sources 204 40–45
    [118]
    Choi Y, Brown E C, Haile S M and Jung W C 2016 Electrochemically modified, robust solid oxide fuel cell anode for direct-hydrocarbon utilization Nano Energy 23 161–71
    [119]
    Li X et al 2015 In situ probing of the mechanisms of coking resistance on catalyst-modified anodes for solid oxide fuel cells Chem. Mater. 27 822–8
    [120]
    Bae K, Noh H-S, Jang D Y, Hong J, Kim H, Yoon K J, Lee J-H, Kim B-K, Shim J H and Son J-W 2016 High-performance thin-film protonic ceramic fuel cells fabricated on anode supports with a non-proton-conducting ceramic matrix J. Mater. Chem. A 4 6395–404
    [121]
    Amiri T, Singh K, Sandhu N K, Hanifi A R, Etsell T H, Luo J-L, Thangadurai V and Sarkar P 2018 High performance tubular solid oxide fuel cell based on Ba0.5Sr0.5Ce0.6Zr0.2Gd0.1Y0.1O3-δ proton conducting electrolyte J. Electrochem. Soc. 165 F764–9
    [122]
    Hanifi A R, Sandhu N K, Etsell T H and Sarkar P 2017 Development of a novel proton conducting fuel cell based on a Ni–YSZ support J. Am. Ceram. Soc. 100 4983–7
    [123]
    Blum L, de Haart L G J, Malzbender J, Margaritis N and Menzler N H 2016 Anode-supported solid oxide fuel cell achieves 70 000 hours of continuous operation Energy Technol. 4 939–42
    [124]
    Weber A and Ivers-Tiffée E 2004 Materials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications J. Power Sources 127 273–83
    [125]
    Blum L, Fang Q, Groß-Barsnick S M, (Bert) de Haart L G J, Malzbender J, Menzler N H and Quadakkers W J 2020 Long-term operation of solid oxide fuel cells and preliminary findings on accelerated testing Int. J. Hydrog. Energy 45 8955–64
    [126]
    Brus G, Iwai H, Sciazko A, Saito M, Yoshida H and Szmyd J S 2015 Local evolution of anode microstructure morphology in a solid oxide fuel cell after long-term stack operation J. Power Sources 288 199–205
    [127]
    Lee D, Lin J-K, Tsai C-H, Wu S-H, Cheng Y-N and Lee R-Y 2017 Analysis of long-term and thermal cycling tests for a commercial solid oxide fuel cell J. Electrochem. Energy Convers. Storage 14 1–8
    [128]
    Malzbender J, Batfalsky P, Vaßen R, Shemet V and Tietz F 2012 Component interactions after long-term operation of an SOFC stack with LSM cathode J. Power Sources 201 196–203
    [129]
    Menzler N H, Batfalsky P, Groß S, Shemet V and Tietz F 2019 Post-test characterization of an SOFC short-stack after 17,000 hours of steady operation ECS Trans. 35 195–206
    [130]
    Blum L, de Haart L G J, Malzbender J, Menzler N H, Remmel J and Steinberger-Wilckens R 2013 Recent results in Jülich solid oxide fuel cell technology development J. Power Sources 241 477–85
    [131]
    Menzler N H, Sebold D and Guillon O 2018 Post-test characterization of a solid oxide fuel cell stack operated for more than 30,000 hours: the cell J. Power Sources 374 69–76
    [132]
    Yang J, Huang W, Wang X, Li J, Yan D, Pu J, Chi B and Li J 2018 Study on component interface evolution of a solid oxide fuel cell stack after long term operation J. Power Sources 387 57–63
    [133]
    Zhang L, Jiang S P, He H Q, Chen X, Ma J and Song X C 2010 A comparative study of H2S poisoning on electrode behavior of Ni/YSZ and Ni/GDC anodes of solid oxide fuel cells Int. J. Hydrog. Energy 35 12359–68
    [134]
    Simwonis D, Tietz F and Stöver D 2000 Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells Solid State Ion. 132 241–51
    [135]
    Nelson G J et al 2012 Three-dimensional microstructural changes in the Ni–YSZ solid oxide fuel cell anode during operation Acta Mater. 60 3491–500
    [136]
    Chen T, Wang W G, Miao H, Li T and Xu C 2011 Evaluation of carbon deposition behavior on the nickel/yttrium-stabilized zirconia anode-supported fuel cell fueled with simulated syngas J. Power Sources 196 2461–8
    [137]
    Yokokawa H, Tu H, Iwanschitz B and Mai A 2008 Fundamental mechanisms limiting solid oxide fuel cell durability J. Power Sources 182 400–12
    [138]
    Khrustov A V, Pavlov D S and Ananyev M V 2020 3D-modeling of microstructure and electrical conductivity degradation of Ni-YSZ cermets Solid State Ion. 346 115202
    [139]
    Laosiripojana N and Assabumrungrat S 2007 Catalytic steam reforming of methane, methanol, and ethanol over Ni/YSZ: the possible use of these fuels in internal reforming SOFC J. Power Sources 163 943–51
    [140]
    He H and Hill J M 2007 Carbon deposition on Ni/YSZ composites exposed to humidified methane Appl. Catal. A: Gen. 317 284–92
    [141]
    Matsuzaki Y and Yasuda I 2000 Poisoning effect of sulfur-containing impurity gas on a SOFC anode: part I. Dependence on temperature, time, and impurity concentration Solid State Ion. 132 261–9
    [142]
    Cheng Z and Liu M 2007 Characterization of sulfur poisoning of Ni–YSZ anodes for solid oxide fuel cells using in situ Raman microspectroscopy Solid State Ion. 178 925–35
    [143]
    Holzer L et al 2011 Microstructure degradation of cermet anodes for solid oxide fuel cells: quantification of nickel grain growth in dry and in humid atmospheres J. Power Sources 196 1279–94
    [144]
    Jiao Z, Takagi N, Shikazono N and Kasagi N 2011 Study on local morphological changes of nickel in solid oxide fuel cell anode using porous Ni pellet electrode J. Power Sources 196 1019–29
    [145]
    Parhizkar T and Roshandel R 2017 Long term performance degradation analysis and optimization of anode supported solid oxide fuel cell stacks Energy Convers. Manage. 133 20–30
    [146]
    Baumann F S, Fleig J, Konuma M, Starke U, Habermeier H-U and Maier J 2005 Strong performance improvement of La0.6Sr0.4Co0.8Fe0.2O3−δ SOFC cathodes by electrochemical activation J. Electrochem. Soc. 152 A2074
    [147]
    Son J W 2012 Solid oxide fuel cell comprising nanostructure composite cathode and fabrication method thereof US Patent No. 20120251917 A1 p 1
    [148]
    Monzón H and Laguna-Bercero M A 2012 Redox-cycling studies of anode-supported microtubular solid oxide fuel cells Int. J. Hydrog. Energy 37 7262–70
    [149]
    Sarantaridis D and Atkinson A 2007 Redox cycling of Ni-based solid oxide fuel cell anodes: a review Fuel Cells 7 246–58
    [150]
    Waldbillig D, Wood A and Ivey D G 2005 Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodes Solid State Ion. 176 847–59
    [151]
    Primdahl S and Mogensen M 2000 Durability and thermal cycling of Ni/YSZ cermet anodes for solid oxide fuel cells J. Appl. Electrochem. 30 247–57
    [152]
    Klemensø T and Mogensen M 2007 Ni–YSZ solid oxide fuel cell anode behavior upon redox cycling based on electrical characterization J. Am. Ceram. Soc. 90 3582–8
    [153]
    Holzer L, Iwanschitz B, Hocker T, Keller L, Pecho O, Sartoris G, Gasser P and Muench B 2013 Redox cycling of Ni–YSZ anodes for solid oxide fuel cells: influence of tortuosity, constriction and percolation factors on the effective transport properties J. Power Sources 242 179–94
    [154]
    Pecho O M, Stenzel O, Iwanschitz B, Gasser P, Neumann M, Schmidt V, Prestat M, Hocker T, Flatt R and Holzer L 2015 3D microstructure effects in Ni–YSZ anodes: prediction of effective transport properties and optimization of redox stability Materials 8 5554–85
    [155]
    Pecho O, Mai A, Münch B, Hocker T, Flatt R and Holzer L 2015 3D microstructure effects in Ni–YSZ anodes: influence of TPB lengths on the electrochemical performance Materials 8 7129–44
    [156]
    Boldrin P, Ruiz-Trejo E, Mermelstein J, Berm´udez Menéndez J M, Ramı´rez Reina T and Brandon N P 2016 Strategies for carbon and sulfur tolerant solid oxide fuel cell materials, incorporating lessons from heterogeneous catalysis Chem. Rev. 116 13633–84
    [157]
    Wang W, Su C, Wu Y, Ran R and Shao Z 2013 Progress in solid oxide fuel cells with nickel-based anodes operating on methane and related fuels Chem. Rev. 113 8104–51
    [158]
    Pan J, Ye Y, Zhou M, Sun X, Ling Y, Yashiro K and Chen Y 2021 Improving the activity and stability of Ni-based electrodes for solid oxide cells through surface engineering: recent progress and future perspectives Mater. Rep. Energy 1 100025
    [159]
    Ferrari A C and Robertson J 2000 Interpretation of Raman spectra of disordered and amorphous carbon Phys. Rev. B 61 14095–107
    [160]
    Nikiel L and Jagodzinski P W 1993 Raman spectroscopic characterization of graphites: a re-evaluation of spectra/ structure correlation Carbon 31 1313–7
    [161]
    Watanabe H, Okino R and Hanamura K 2019 Structural evolution of carbon deposition on a Ni/YSZ cermet of a SOFC analyzed by soft x-ray XANES spectroscopy Int. J. Hydrog. Energy 44 24028–35
    [162]
    Bengaard H S, Nørskov J K, Sehested J, Clausen B S, Nielsen L P, Molenbroek A M and Rostrup-Nielsen J R 2002 Steam reforming and graphite formation on Ni catalysts J. Catal. 209 365–84
    [163]
    Bartholomew C H 1982 Carbon deposition in steam reforming and methanation Catal. Rev. 24 67–112
    [164]
    Chen Z-Y, Bian L-Z, Wang L-J, Yu Z-Y, Zhao H-L, Li F-S and Chou K-C 2017 Topography, structure, and formation kinetic mechanism of carbon deposited onto nickel in the temperature range from 400 to 850 ◦C Int. J. Miner. Metall. Mater. 24 574–83
    [165]
    Blinn K S, Abernathy H, Li X, Li M, Bottomley L A and Liu M 2012 Raman spectroscopic monitoring of carbon deposition on hydrocarbon-fed solid oxide fuel cell anodes Energy Environ. Sci. 5 7913–7
    [166]
    Helveg S, López-Cartes L-C, Sehested J, Hansen P L, Clausen B S, Rostrup-Nielsen J R, Abild-Pedersen F and Nørskov J K 2004 Atomic scale growth of carbon nanofibre Nature 427 426–9
    [167]
    Kirtley J, Singh A, Halat D, Oswell T, Hill J M and Walker R A 2013 In situ Raman studies of carbon removal from high temperature Ni–YSZ cermet anodes by gas phase reforming agents J. Phys. Chem. C 117 25908–16
    [168]
    Kirtley J D, Qadri S N, Steinhurst D A and Owrutsky J C 2016 In situ, simultaneous thermal imaging and infrared molecular emission studies of solid oxide fuel cell electrodes J. Power Sources 336 54–62
    [169]
    Pomfret M B, Marda J, Jackson G S, Eichhorn B W, Dean A M and Walker R A 2008 Hydrocarbon fuels in solid oxide fuel cells: in situ Raman studies of graphite formation and oxidation J. Phys. Chem. C 112 5232–40
    [170]
    Yin W and Chuang S S C 2017 CH4 internal dry reforming over a Ni/YSZ/ScSZ anode catalyst in a SOFC: a transient kinetic study Catal. Commun. 102 62–66
    [171]
    Sasaki K and Teraoka Y 2003 Equilibria in fuel cell gases J. Electrochem. Soc. 150 A885
    [172]
    Xiao J, Xie Y, Liu J and Liu M 2014 Deactivation of nickel-based anode in solid oxide fuel cells operated on carbon-containing fuels J. Power Sources 268 508–16
    [173]
    Sumi H, Puengjinda P, Muroyama H, Matsui T and Eguchi K 2011 Effects of crystal structure of yttria- and scandia-stabilized zirconia in nickel-based SOFC anodes on carbon deposition and oxidation behavior J. Power Sources 196 6048–54
    [174]
    Kim Y, Kim J H, Bae J, Yoon C W and Nam S W 2012 In situ analyses of carbon dissolution into Ni–YSZ anode materials J. Phys. Chem. C 116 13281–8
    [175]
    Liu Y, Shao Z, Mori T and Jiang S P 2021 Development of nickel based cermet anode materials in solid oxide fuel cells—now and future Mater. Rep. Energy 1 100003
    [176]
    Kuhn J and Kesler O 2014 Method for in situ carbon deposition measurement for solid oxide fuel cells J. Power Sources 246 430–7
    [177]
    Kirtley J D, Halat D M, McIntyre M D, Eigenbrodt B C and Walker R A 2012 High-temperature ‘spectrochronopotentiometry’: correlating electrochemical performance with in situ Raman spectroscopy in solid oxide fuel cells Anal. Chem. 84 9745–53
    [178]
    Eigenbrodt B C, Pomfret M B, Steinhurst D A, Owrutsky J C and Walker R A 2011 Direct, in situ optical studies of Ni–YSZ anodes in solid oxide fuel cells operating with methanol and methane J. Phys. Chem. C 115 2895–903
    [179]
    Hagen A, Johnson G B and Hjalmarsson P 2014 Electrochemical evaluation of sulfur poisoning in a methane-fuelled solid oxide fuel cell: effect of current density and sulfur concentration J. Power Sources 272 776–85
    [180]
    Gong M, Liu X, Trembly J and Johnson C 2007 Sulfur-tolerant anode materials for solid oxide fuel cell application J. Power Sources 168 289–98
    [181]
    Niakolas D K 2014 Sulfur poisoning of Ni-based anodes for solid oxide fuel cells in H/C-based fuels Appl. Catal. A: Gen. 486 123–42
    [182]
    Harris W M et al 2014 Three-dimensional microstructural imaging of sulfur poisoning-induced degradation in a Ni–YSZ anode of solid oxide fuel cells Sci. Rep. 4 1–7
    [183]
    Hansen J B 2008 Correlating sulfur poisoning of SOFC nickel anodes by a Temkin isotherm Electrochem. Solid-State Lett. 11 178–81
    [184]
    Bøgild Hansen J and Rostrup-Nielsen J 2010 Sulfur poisoning on Ni catalyst and anodes Handbook of Fuel Cells vol 6 (Hoboken, NJ: Wiley) pp 1–13
    [185]
    Sasaki K et al 2006 H2S poisoning of solid oxide fuel cells J. Electrochem. Soc. 153 A2023
    [186]
    Zha S, Cheng Z and Liu M 2007 Sulfur poisoning and regeneration of Ni-based anodes in solid oxide fuel cells J. Electrochem. Soc. 154 B201
    [187]
    Ogura T, Ishimoto T and Koyama M 2014 Density functional theory study of sulfur poisoning on nickel anode in solid oxide fuel cells: effects of surface and subsurface sulfur atoms J. Chem. Eng. Japan 47 793–800
    [188]
    Cheng Z, Zha S and Liu M 2007 Influence of cell voltage and current on sulfur poisoning behavior of solid oxide fuel cells J. Power Sources 172 688–93
    [189]
    Li T S and Wang W G 2011 Sulfur-poisoned Ni-based solid oxide fuel cell anode characterization by varying water content J. Power Sources 196 2066–9
    [190]
    Lee H S, Lee H M and Lim H-T 2018 Sulfur poisoning of Ni anode as a function of operating conditions in solid oxide fuel cells J. Korean Inst. Met. Mater. 56 893–9
    [191]
    Hauch A, Hagen A, Hjelm J and Ramos T 2014 Sulfur poisoning of SOFC anodes: effect of overpotential on long-term degradation J. Electrochem. Soc. 161 F734–43
    [192]
    Mai A, Haanappel V A C, Uhlenbruck S, Tietz F and Stöver D 2005 Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells: part I. Variation of composition Solid State Ion. 176 1341–50
    [193]
    Aphale A, Liang C, Hu B and Singh P 2017 Cathode degradation from airborne contaminants in solid oxide fuel cells: a review Solid Oxide Fuel Cell Lifetime and Reliability (London: Elsevier Ltd) (https://doi.org/ 10.1016/B978-0-08-101102-7.00006-4)
    [194]
    Yokokawa H, Sakai N, Horita T, Yamaji K, Brito M E and Kishimoto H 2008 Thermodynamic and kinetic considerations on degradations in solid oxide fuel cell cathodes J. Alloys Compd. 452 41–47
    [195]
    Keane M, Mahapatra M K, Verma A and Singh P 2012 LSM-YSZ interactions and anode delamination in solid oxide electrolysis cells Int. J. Hydrog. Energy 37 16776–85
    [196]
    Xiong Y, Yamaji K, Horita T, Yokokawa H, Akikusa J, Eto H and Inagaki T 2009 Sulfur poisoning of SOFC cathodes J. Electrochem. Soc. 156 B588
    [197]
    Liu R R, Kim S H, Taniguchi S, Oshima T, Shiratori Y, Ito K and Sasaki K 2011 Influence of water vapor on long-term performance and accelerated degradation of solid oxide fuel cell cathodes J. Power Sources 196 7090–6
    [198]
    Sharma V, Mahapatra M K, Krishnan S, Thatcher Z, Huey B D, Singh P and Ramprasad R 2016 Effects of moisture on (La, A)MnO3 (A = Ca, Sr, and Ba) solid oxide fuel cell cathodes: a first-principles and experimental study J. Mater. Chem. A 4 5605–15
    [199]
    Zhao Z, Liu L, Zhang X, Wu W, Tu B, Ou D and Cheng M 2013 A comparison on effects of CO2 on La0.8Sr0.2MnO3+δ and La0.6Sr0.4CoO3-δ cathodes J. Power Sources 222 542–53
    [200]
    Darvish S, Asadikiya M, Hu B, Singh P and Zhong Y 2016 Thermodynamic prediction of the effect of CO2 to the stability of (La0.8Sr0.2)0.98MnO3±δ system Int. J. Hydrog. Energy 41 10239–48
    [201]
    Zurek J, Margaritis N, Naumenko D, Menzler N H and Quadakkers W J 2019 Behaviour of metallic materials in simulated service environments of CO2/H2O co-electrolysis systems for power-to-X application Oxid. Met. 92 353–77
    [202]
    de Haart L G J and Vinke I C 2019 Long-term operation of planar type SOFC stacks ECS Trans. 35 187–94
    [203]
    Fang Q, Blum L, Batfalsky P, Menzler N H, Packbier U and Stolten D 2013 Durability test and degradation behavior of a 2.5 kW SOFC stack with internal reforming of LNG Int. J. Hydrog. Energy 38 16344–53
    [204]
    Blum L, Packbier U, Vinke I C and de Haart L G J 2013 Long-term testing of SOFC stacks at forschungszentrum jülich Fuel Cells 13 646–53
    [205]
    Menzler N H, Malzbender J, Schoderböck P, Kauert R and Buchkremer H P 2014 Sequential tape casting of anode-supported solid oxide fuel cells Fuel Cells 14 96–106
    [206]
    Tabernig B, Franco T, Venskutonis A, Kestler H and Sigl L 2011 Properties of a P/M FeCr alloy as interconnector and substrate materials for metal supported solid oxide fuel cells Euro PM vol 3 pp 449–54
    [207]
    Menzler N H, Sebold D and Wessel E 2014 Interaction of La0.58Sr0.40Co0.20Fe0.80O3-δ cathode with volatile Cr in a stack test—scanning electron microscopy and transmission electron microscopy investigations J. Power Sources 254 148–52
    [208]
    Menzler N H, Sebold D and Fang Q 2015 Chromium-related degradation of thin-film electrolyte solid oxide fuel cell stacks J. Electrochem. Soc. 162 F1275–81
    [209]
    Matsui T, Kishida R, Kim J, Muroyama H and Eguchi K 2019 Performance deterioration of Ni-based cermet induced by electrochemically-generated steam in anode ECS Trans. 25 2023–30
    [210]
    Yang L, Cheng Z, Liu M and Wilson L 2010 New insights into sulfur poisoning behavior of Ni–YSZ anode from long-term operation of anode-supported SOFCs Energy Environ. Sci. 3 1804–9
    [211]
    Zhao Y, Malzbender J and Gross S M 2011 The effect of room temperature and high temperature exposure on the elastic modulus, hardness and fracture toughness of glass ceramic sealants for solid oxide fuel cells J. Eur. Ceram. Soc. 31 541–8
    [212]
    Gross S M, Federmann D, Remmel J and Pap M 2011 Reinforced composite sealants for solid oxide fuel cell applications J. Power Sources 196 7338–42
  • 加载中

Catalog

    Figures(1)

    Article Metrics

    Article Views(646) PDF downloads(151)
    Article Statistics
    Related articles from

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return