| Citation: | Haojie Kong, Tao Yang, Tianlong Zhang, Boxuan Cao, Chain Tsuan Liu. Nanostructured steels for advanced structural applications[J]. Materials Futures, 2022, 1(1): 013501. doi: 10.1088/2752-5724/ac376d
|
This vision summarizes the recent advancement of nanostructured steels for advanced structural applications, foresees possible challenges and pinpoints future directions as well as opportunities in this new era of industrial revolution 4.0.
| [1] |
He B B, Hu B, Yen H W, Cheng G J, Wang Z K, Luo H W and Huang M X 2017 High dislocation density-induced large ductility in deformed and partitioned steels Science 357 1029–32
|
| [2] |
Liu L, Yu Q, Wang Z, Ell J, Huang M X and Ritchie R O 2020 Making ultrastrong steel tough by grain-boundary delamination Science 368 1347–52
|
| [3] |
Graville B A 1978 Cold cracking in welds in HSLA steels Welding of HSLA (Microalloyed) Structural Steels—Proc. Int. Conf. (Ohio)
|
| [4] |
Garcia-Mateo C, Caballero F G and Bhadeshia H K D H 2003 Development of hard bainite ISIJ Int. 43 1238–43
|
| [5] |
Li Y, Raabe D, Herbig M, Choi P, Goto S, Kostka A, Yarita H, Borchers C and Kirchheim R 2014 Segregation stabilizes nanocrystalline bulk steel with near theoretical strength Phys. Rev. Lett. 113 106104
|
| [6] |
Jiao Z B, Luan J H, Miller M K, Chung Y W and Liu C T 2017 Co-precipitation of nanoscale particles in steels with ultra-high strength for a new era Mater. Today 20 142–54
|
| [7] |
Kong H J, Jiao Z B, Lu J and Liu C T 2021 Low-carbon advanced nanostructured steels: microstructure, mechanical properties, and applications Sci. China Mater. 64 1580–97
|
| [8] |
Bhadeshia H K D H 2013 The first bulk nanostructured metal Sci. Technol. Adv. Mater. 14 014202
|
| [9] |
Halfa H 2014 Recent trends in producing ultrafine grained steels J. Miner. Mater. Charact. Eng. 2 428–69
|
| [10] |
Jiao Z B, Luan J H, Miller M K and Liu C T 2015 Precipitation mechanism and mechanical properties of an ultra-high strength steel hardened by nanoscale NiAl and Cu particles Acta Mater. 97 58–67
|
| [11] |
Niu M C, Zhou G, Wang W, Shahzad M B, Shan Y and Yang K 2019 Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel Acta Mater. 179 296–307
|
| [12] |
Jiang S et al 2017 Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation Nature 544 460–4
|
| [13] |
Kong H J and Liu C T 2018 A review on nano-scale precipitation in steels Technologies 6 36
|
| [14] |
Kurnsteiner P, Wilms M B, Weisheit A, Gault B, Jagle E A and Raabe D 2020 High-strength Damascus steel by additive manufacturing Nature 582 515–9
|
| [15] |
Abrahams R A 2019 Low alloy high performance steel USA Patent US20160369362A1
|
| [16] |
Chen R, Kong H J, Luan J H, Wang A D, Jiang P and Liu C T 2020 Effect of external applied magnetic field on microstructures and mechanical properties of laser welding joint of medium-Mn nanostructured steel Mater. Sci. Eng. A 792 139787
|
| [17] |
Zhang Z W, Liu C T, Wang X L, Miller M K, Ma D, Chen G, Williams J R and Chin B A 2012 Effects of proton irradiation in nanocluster precipitation in ferritic steel containing fcc alloying additions Acta Mater. 60 3034–46
|
| [18] |
Wall M 2020 SpaceX’s Starship will soon be made of different stuff Space.com (available at: www.space.com/spacex-starship-new-stainless-steel-alloy.html)
|
| [19] |
Song G et al 2015 Ferritic alloys with extreme creep resistance via coherent hierarchical precipitates Sci. Rep. 5 16327
|
| [20] |
Kong H J, Xu C, Bu C C, Da C, Luan J H, Jiao Z B, Chen G and Liu C T 2019 Hardening mechanisms and impact toughening of a high-strength steel containing low Ni and Cu additions Acta Mater. 172 150–60
|
| [21] |
Kuzmina M, Herbig M, Ponge D, Sandlobes S and Raabe D 2015 Linear complexions: confined chemical and structural states at dislocations Science 349 1080–3
|
| [22] |
Kuzmina M, Ponge D and Raabe D 2015 Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: example of a 9 wt% medium Mn steel Acta Mater. 86 182–92
|
| [23] |
Armstrong R W 2017 Dislocation pile-ups, strength properties and fracturing Rev. Adv. Mater. Sci. 48 1–12
|
| [24] |
Omori T, Ando K, Okano M, Xu X, Tanaka Y, Ohnuma I, Kainuma R and Ishida K 2011 Superelastic effect in polycrystalline ferrous alloys Science 33 68–71
|
| [25] |
Tanaka Y, Himuro Y, Kainuma R, Sutou Y, Omori T and Ishida K 2010 Ferrous polycrystalline shape-memory alloy showing huge superelasticity Science 327 1488–90
|
| [26] |
Oshima R and Sugiyama M 1982 Martensite transformations in Fe-Pd alloys J. Phys. Colloq. 43 383–8
|
| [27] |
Dunne D P and Wayman C M 1973 The effect of austenite ordering on the martensite transformation in Fe-Pt alloys near the composition Fe3Pt: I. Morphology and transformation characteristics Metall. Trans. 4 137–45
|
| [28] |
Kajiwara S 1999 Characteristic features of shape memory effect and related transformation behavior in Fe-based alloys Mater. Sci. Eng. A 273–275 67–88
|
| [29] |
Maki T, Kobayashi K, Minato M and Tamura I 1984 Thermoelastic martensite in an ausaged Fe-Ni-Ti-Co alloy Scr. Metal. 18 1105–9
|
| [30] |
Tseng L W, Ma J, Hornbuckle B C, Karaman I, Thompson G B, Luo Z P and Chumlyakov Y I 2015 The effect of precipitates on the superelastic response of [100] oriented FeMnAlNi single crystals under compression Acta Mater. 97 234–44
|
Copyright © 2021 Materials Futures Editorial Office
Supported by:
Beijing Renhe Information Technology Co., Ltd.
DownLoad: